I found a "solution" to the blank screen after a few minutes problem. I am on vip922 number 3. I decided not to RMA this one due to the hassles of return, transfering recorded stuff. My current vip922 will just quit. The problem seems to be overheating and lack of sufficient cooling air flow through the vip922. You need at least 2 inches on either SIDE of the vip922. If you only have about an inch, then it will overheat pretty quickly.
I had to place a clamp-on fan to blow into the left side to keep it cool. It has worked flawlessly since (over the past year). If someone unplugs the fan or turns it off, I can expect less than 30 minutes of TV time (depending on room temperaure) before my little blank screen "reminder" says that I gotta turn that fan back on.
While I type this, DirecTV is installing an HMC, and the vip922 is being removed.
I had to place a clamp-on fan to blow into the left side to keep it cool. It has worked flawlessly since (over the past year). If someone unplugs the fan or turns it off, I can expect less than 30 minutes of TV time (depending on room temperaure) before my little blank screen "reminder" says that I gotta turn that fan back on.
While I type this, DirecTV is installing an HMC, and the vip922 is being removed.