Advice needed for 622 hardware upgrade

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE

loudbmw

Active SatelliteGuys Member
Original poster
Jan 5, 2006
15
2
Advice needed for 622 hardware upgrade

I figure I’d ask the experts here to make sure my work order reflects the proper hardware for my 622 upgrade I plan to order April 1. Don't want the installer to make two trips like last time.

Current setup in central Virginia

Dish 500 pointed at 100 and 119 with a legacy quad lnb (not dish pro)
Dish 921 uses two of sat feeds
Dish 508 uses feed #3
Dish 4000 legacy receiver uses feed #4

Wanted

A dish 1000 won’t work. The 129 location can’t be seen from where my dish 500 is (low angle and due to trees - not mine). Where I can see 129, I can’t see 110. I get great signal strength of 120-125 on both 110 and 119 locations so I really don’t want to mess with the Dish 500.

Do I ask for another Dish 500 instead of the dish 1000? (they should be happy – it’s cheaper). This also gives me the option of swinging the second dish to 61.5 if I need to.

What lnb do I ask for. Will a DP34 work with the legacy 4000 or Do I need a DPP instead of a DP. Do they make a DPP34 or are only DPP44’s available (overkill?).

Thanks in advance.

Lou
loudbmw @ msn.com
 

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)