The second birdview design, factory modified away from Birdview's (early) exclusive receiver design to work with any IRD, or now a 4d-FTA C-band system.
(1) available right now, maybe more later. Would be fine for FTA on an original BV scalar if you don't want Ku Band (you'd need to somehow switch H/V) I used on "Horizontal" side only with power-block splitter off of 4D.
Also good if you don't want to modify your BV dish for new LNBF. DC input on Male BNC (horizontal) side. Work just fine with dual inputs on 4D if you're converting a Birdview/Motorola 4d system for W-5 after 1/4/10. I upgraded to C/Ku with a 621, which was then replaced again.
"Asking" $49. will ship economy at no charge. PM for more info or to purchase, paypal is fine.
(1) available right now, maybe more later. Would be fine for FTA on an original BV scalar if you don't want Ku Band (you'd need to somehow switch H/V) I used on "Horizontal" side only with power-block splitter off of 4D.
Also good if you don't want to modify your BV dish for new LNBF. DC input on Male BNC (horizontal) side. Work just fine with dual inputs on 4D if you're converting a Birdview/Motorola 4d system for W-5 after 1/4/10. I upgraded to C/Ku with a 621, which was then replaced again.
"Asking" $49. will ship economy at no charge. PM for more info or to purchase, paypal is fine.
