Any suggestions finding SAT C? I have a tripple LNB intergrated. I switched out LNB's, I ran a line staright from the Dish to the receiver and all I find is A and B. I get all the core programming Off A (101) but NO channel 99 or 400. C wont align. I adjusted elevation, az, and tilt I locked on tild and elevation when I had full strength on A and B. How is this possible with C being the center LNB?? I thought maybe I had A as A and B as C and no B locked so I scanned left to right and couldnt find tilt? I replaced a Dish and used the courrent pole. I didnt check to see if the Pole was leveled does it matter much? Any suggestions????
