Check Switch error on DVR625 (1 Viewer)

Register Today to see less ads! It's Free!

Acct70

Thread Starter
New Member
Feb 22, 2010
3
0
46750
I recently purchased a DVR625 to replace my old 322. First day I get it, call dish, and it works fine. The next day, I am getting a "Check Switch" error and nothing will work. When I run "Check Switch" the 110 and 119 come up fine, but there is an error showing on 121. If I take the 322 and hook it back up, run check switch all 3 test OK. Any ideas?
Thanks
 
Register Today to see less ads! It's Free!

scoobyxj

SatelliteGuys Pro
Jul 14, 2009
335
1
Ohio
I'm going to assume your system has a DP34 switch in it, and that you know that the separator can't be used. Also remember if you have a DPP44 in the system it needs the power inserter on port one.
 

Acct70

Thread Starter
New Member
Feb 22, 2010
3
0
46750
Yes, it is a Superdish with DP34. No separator, hooked up exactly as the 322.
Do I even need the 121 hooked up anymore? I think it used to carry locals, but looks like it is mostly international channels now, which I don't subscribe to.
 

magnum2066

SatelliteGuys Pro
Sep 22, 2009
496
0
Get Bent.
You don't need 121. If the error bothers you just go to the switch and unplug it from the LNB in port. You'll have to run a check switch or two until you find which was is 121 and leave 110/119 plugged in. If the switch is outside don't forget to finger tighten the connectors then give them a quarter turn.
 
Register Today to see less ads! It's Free!

Users who are viewing this thread

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Latest posts

Top