Dish 1000 install (1 Viewer)

Register Today to see less ads! It's Free!


SatelliteGuys Family
Mar 3, 2005
I am replacing my 500 with a 1000. My current set up is a 119/110/61.5. I am going to go to 119/110/61.5/ 129. When I install can I keep the same mast? also when I connect to my DPP44 do I just take the 129 feed and run it to the switch or should I do that lnb loop that it shows in the diagram
Register Today to see less ads! It's Free!


Well-Known SatelliteGuys Member
Sep 20, 2005
Yes, you can use the same mast. Just had a 1000 installed to replace my 500 last week. Not sure on the other stuff


SatelliteGuys Master
Feb 6, 2005
Akron, Ohio, United States
The best way would be to keep the 61.5 and replace the 110/119 with a D1000. The LNB's are up to you. I would recommend using a DP Twin and DP Dual on the 1000 and run all 4 locations (110, 119, 129, 61.5) to your DPP 44 switch.

As long as you run the 119 into port 1 on your switch, you should be fine.
Register Today to see less ads! It's Free!

Users who are viewing this thread

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Latest posts