dish help with 522

[j5races]

Hi all,

I have a dish 500 with dishpro. it has a single lnb for 110 and a single for 119. I need to hook up a 522 to it, but i only have a single feed for each sat and no way to combine and split the signal to get two feed with boths sat on them. What parts do i need to make this system right?? thanks in advance.

PS right now i just hooked up one feed off the 110 to the 522 and it has only a three day EPG and nothing on sat 2 (obviously).

thanks again Jon

 

[ShadowEKU]

DP34 would probably be the best way to go. 110 on input 1 and 119 on input 2 (I may have those reversed) then you have 4 outputs.... 2 of which go to the 522 and if you want to ad recievers in the future you have 2 more feeds

 

[SimpleSimon]

Shadow's solution is good. Alternatively, replace the existing LNBFs with a DP Quad, and sell the old ones - it's probably a toss-up as to final cost.

Shadow: I like 119 on port 1 of switches, and 110 on port 2.

 

[ShadowEKU]

Shadow's solution is good. Alternatively, replace the existing LNBFs with a DP Quad, and sell the old ones - it's probably a toss-up as to final cost.

Shadow: I like 119 on port 1 of switches, and 110 on port 2.

I knew I was backward..