Dish Receiver - Internet Connection Sharing

Advertisements

BriOz84

New Member
Original poster
Mar 28, 2008
1
0
I have looked everywhere to try and figure out this problem but I have found nothing that has helped. I hoping this forum could help provide the best solution. I have a Dish VIP 622DVR receiver that is located in a media closet with a laptop (wireless internet connection), DVD, receiver, etc... There is no hard internet connection in the closet and I only use a cell phone; however I have a wireless router in another room of the house. I want to hook up my Dish receiver to a broadband connection but don't want to run a wire, get a landline, or buy a Homeplug. The laptop is my old Sony Vaio that runs on XP. I found that there is a way to share an internet connection...i.e. connect an Ethernet cord from my computer directly into the Dish receiver and share the wireless connection. I configured my computer to allow for this connection; however my receiver is still unable to connect. Thoughts, ideas, suggestions??? Thank you.
 
What kind of cable are you using

A standard CAT 5 Cable doesn't suffice for something like this. You will need a crossover cable. I had a similar set up a few months ago with my PS3 and it turned out the only problem was that I needed a crossover cable. Once I got that I was able to share internet with almost anything turning my laptop into a wireless hub of sorts.

Get a Crossover cable, and make sure it's a crossover cable, or you could try to make one yourself if that is your sort of thing, but I would just recommend you go get a crossover cable and see if that doesn't do the trick.
 
A crossover cable directly between the notebook's wired ethernet port and the 622, or standard cables between the 2 and a swtch or hub. Also make sure you select the wireless LAN as the connection you want to share.
Miner
 

PIP questions

Calvary CAUO37500 External HDD

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Latest posts