FSTV FreeSpeech TV - Anyone getting this?

Status
Please reply by conversation.

Babadem

SatelliteGuys Pro
May 21, 2007
2,301
166
MA
In the process on setting up satellite channels on Amiko-A3, and just scanned in a new symbol rate of 11840V and SR is unchanged. Anyone else observed this?
 

iBoston

SatelliteGuys Pro
Jul 15, 2014
2,607
2,156
North Central
THANK YOU VERY MUCH. We had a very windy storm and i went to FSTV and it was gone. Since it is such a tricky channel to get in, i assumed my dish was out of alignment. Sure enough, i scanned the transponder you mentioned, and wham bam, theres FSTV!

11840 v 1784
 

lost_mesa

SatelliteGuys Pro
Oct 18, 2010
557
472
New Mexico
Similar story here. I took down my 1.2 meter dish a few weeks ago to work on some motor issues. Put it back up last weekend and got it tracking pretty nicely, except I couldn't get FSTV. I would have kept trying, but luckily it started raining. But not have it tracking well enough to get FSTV has been bugging me all week.
 

iBoston

SatelliteGuys Pro
Jul 15, 2014
2,607
2,156
North Central
Similar story here. I took down my 1.2 meter dish a few weeks ago to work on some motor issues. Put it back up last weekend and got it tracking pretty nicely, except I couldn't get FSTV. I would have kept trying, but luckily it started raining. But not have it tracking well enough to get FSTV has been bugging me all week.

Yea, when i fine tune, i tune up off 123w and the UTW channels. If i can get FSTV, ill get everything else.
 
  • Like
Reactions: lost_mesa

iBoston

SatelliteGuys Pro
Jul 15, 2014
2,607
2,156
North Central
FSTV has moved yet again back to 11857 v 1784.

I also found out that the new Ecoda inline amplifier makes getting FSTV impossible. The inline amplifier makes things worse for me!
 
  • Like
Reactions: northgeorgia

iBoston

SatelliteGuys Pro
Jul 15, 2014
2,607
2,156
North Central
It appears FSTV has kicked up the power. Where i normally get about a 55% quality, i am now holding solid at 70% - So, for those who couldn't quite pull it in, try again now.
 

Babadem

SatelliteGuys Pro
May 21, 2007
2,301
166
MA
Well, I am getting 26 to 44 % right now on FSTV's feed on G-18 bird!:biggrin go figure they must have crank up the RF juice!
It should be higher. I'm getting 77% quality on the Amiko A3. What receiver are you using?
 

pacificrim

SatelliteGuys Pro
Oct 5, 2008
1,199
1,117
West Coast Canada
I was rescanning on 123w and noticed that FSTV at 11856 V 1784 has disappeared without a trace. Everything else is great and I went out to the dish and everything is good there too. Anyone getting a signal?
 
Status
Please reply by conversation.

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)