LNB POLARITY ISSUES
- Thread starter mld091776
- Start date
- Latest activity Latest activity:
- Replies 2
- Views 1K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
Did you aim the dish? The El/Az readings they give you are approximate. You'll still need to tweak the dish to get a reading.
A) Make sure your new mount is plumb.
B) Set the El & Skew according to the chart.
C) Set up your receiver to for satellite signal.
D) Connect the dish to receiver
E) Slowly pan back and forth. If you've gone +/- 45 degrees from the starting Az, adjust the elevation either +/- 1 degree and pan again. Continue searching until you've checked +/- 5 degrees elevation and +/- 45 degrees Az for each El change.
A) Make sure your new mount is plumb.
B) Set the El & Skew according to the chart.
C) Set up your receiver to for satellite signal.
D) Connect the dish to receiver
E) Slowly pan back and forth. If you've gone +/- 45 degrees from the starting Az, adjust the elevation either +/- 1 degree and pan again. Continue searching until you've checked +/- 5 degrees elevation and +/- 45 degrees Az for each El change.
Call 1-800-333-3474 If you dropped the dish you could easily have warped the surface and need a new dish.
