This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

Mitsubishi 65" not going into 1080 mode with 722k

F

fatpug

SatelliteGuys Family
Original poster
Mar 8, 2010
39
1
Here
New install - The mitsubishi 65c9 will not go into 1080 mode with the 722k rcv

Any suggestion?

I have tried both hdmi and component out of the 722k
 
1080p or 1080i?

1080p is only for certain ppv movies or VOD movies right now on dish.
If you are trying to get the receiver to push 1080i to your tv, you will need to go into the HD settings on your receiver and set it to 1080i, it may be set to 720 right now.
 
The 722k is set to 720 now. When we try to switch to 1080i it trys then goes back to 720
 
could be a poor hdmi cable? the rcvr and tv have a conversation when you try to change res and if they can't agree you drop back to previous setting.
 
It is working now. I hooked the 722k up to a LCD tv and selected 1080i on the 722k. I then took the HDMI cable and hooked it back up the the MITS. It it working in 1080 now on the MITS.

Thank you for your suggestions.
 
fatpug said:
New install - The mitsubishi 65c9 will not go into 1080 mode with the 722k rcv

Any suggestion?

I have tried both hdmi and component out of the 722k
Click to expand...

Did you changed the Video setup in the 722? Menu - Setup - HDTV Setup - TV Type and change to 1080I?
 
You must log in or register to reply here.

Similar threads

J
External hard drive now not recognized by 722k
Replies
15
Views
2K
JS_racer
J
S
What going on with Dish?
Replies
19
Views
2K
telstar_1
T
Not sure whats going on
Replies
14
Views
1K
mcasdorph
EHD with recordings from ViP 722K on Hopper 3 not supported anymore?
Replies
46
Views
5K
ppappas
722k reciever on tv2 modulator messing up
Replies
2
Views
524
tjboston5676
Menu
Log in
Register