This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

No DVR logos on Wally with EHD

Not normal. Has it done a 14 day guide download since the hard drive was connected?

The Wally has a 14 day guide with an EHD attached? The reason I ask is because the max guide with a Hopper or other Dish DVR receivers is about 9 days.
 
Reactions: HipKat
Since you just got your Wally activated yesterday, yes. It takes awhile for the tile artwork to load. Do not be surprised if the artwork never loads for those early recordings, but any new recordings going forward should definitely have the artwork. Also, as others have stated, the guide should be almost nine days maximum.
 
Reactions: JSheridan

I guess we’ll find out soon enough.
 
Two questions, what's that box with the clock below the TV? Just my personal curiosity. Now back to your problem. Have you run a check switch to make sure you're picking up all three sats?

I’m on Eastern arc; there are only 2 satellites.

The box below the TV is the Amiko HD.265 FTA receiver for my 6 Ku band satellites. It is distributed by KE4EST
 
Reactions: KE4EST
Mine took several days for everything to sync up as far as the icons go. Dish is still piggy-backing on old 9600 baud dial up.
 
Reactions: pattykay