one dish 77/72/61.5

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE

neftv

SatelliteGuys Pro
Original poster
Dec 9, 2005
199
0
PA USA
Looks like I lost satellite at 72 degrees..
I have a dpp 1k.4
When I check switch port 1 77 good, port 2 good connection no signal, port 3 61.5 good. Port 4 not used.

Using vip622 was working good till the friget weather of a couple weeks ago here in pa. As it is I only getting the two SATs. Thoughts...
 
Just a belated update to my old problem. I replaced the dp separator and did the rescan and all three satellites are back now. I did not have to troubleshoot the LNBs.

Sent from my ATRIX HD using Tapatalk
 
I have my other 2 tvs hooked up with an rf modulator and splitters and rg6 cables. I lost the picture to one of the tvs. Checked all connections and had a good picture to the other tvs. There was a barrel connecter about three feet from the bad tv. I replaced it and got an excellent picture. So, you never know what can go bad at any time. Why would a barrel connector go bad?
 
I seen barrels fail due to moisture getting in and also seen them
get hot causing eventual failure.

Sent from my RM-820_nam_att_100 using Tapatalk
 

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Latest posts