Pearl TV / Silicon dust article

Pearl TV Doubles Down on 'National Security Threat' Posed by SiliconDust's 3.0 Tuners

Ran into this article which may interest some of you.


I'm glad I sold mine early on. I knew they would never add decryption for the DRM feeds.

In my opinion ATSC 3.0 is a completely botched clusterf**k and will never be fully implemented.
 

Pearl TV Doubles Down on 'National Security Threat' Posed by SiliconDust's 3.0 Tuners

Ran into this article which may interest some of you.


Silicondust had an excellent response to Pearl's article. They were able to rebut all of the issues. Here is their response:



Sent from my iPhone using Tapatalk
 
  • Like
Reactions: osu1991 and FTA4PA
Silicondust had an excellent response to Pearl's article. They were able to rebut all of the issues.

And yet their flagship unit is still not usable for the majority of ATSC 3.0 broadcasts.

Regardless of what they say, they can't deliver a product that works. That's called failure.
 
And yet their flagship unit is still not usable for the majority of ATSC 3.0 broadcasts.

Regardless of what they say, they can't deliver a product that works. That's called failure.

The issue is that no network device exists that will work with the current encryption. You need a tuner for each TV set and the broadcast is not available for tablets, computers, and phones.


Sent from my iPhone using Tapatalk
 
Doesn't the Zapperbox work with the current encryption?

Yes but you need a Zapperbox unit for each TV. Zapperbox tried to set up a network solution but it failed. So if you have multiple TVs you need to buy a Zapperbox for each TV.
There is no gateway device that will decrypt.


Sent from my iPhone using Tapatalk
 
You still need a Zapperbox for each TV. The unit you linked to is $275. Zapperbox had planned to eventually be able to use apps on other streaming devices but this was shot down by A3SA.
The Zapperbox M3 (mini) is the client (no tuner) that connects to the M1 or M2 Zapperbox. The Zapperbox M3 mini costs $130. So $130 for each additional TV that you want to connect to the M1 or M2 Zapperbox. The consensus is that Zapperbox will not be able to develop apps that satisfy A3SA requirements.

Sent from my iPhone using Tapatalk
 
  • Like
Reactions: osu1991

Yet another ATSC 1 or 3 back and forth article

Users Who Are Viewing This Thread (Total: 5, Members: 0, Guests: 5)

Latest posts