A piece of 1-1/2" water pipe might make a suitable shim to make that fit.Can I get a steel pipe adaptor that joins the 2 3/8 " OD WIldblue collar to 1 1/2 inch OD Dish network pipe??
DISH masts are 1-5/8" tubing which means that they have a 1-5/8" OD.Can I get a steel pipe adaptor that joins the 2 3/8 " OD WIldblue collar to 1 1/2 inch OD Dish network pipe??
If you're going to add stiffening devices to the thing, it may be easier just to start with 2" pipe (2-3/8" OD) and have something fabricated.I would reinforce all the parts and add 2 arms for stability also.
Glad I recommended 2" pipe (since all 2" pipe has a 2-3/8" OD regardless of schedule).I figured out a good solution using a thickwalled galv. pipe.Stronger than the WB mast.
As long as it isn't kinked, skinned (jacket scraped or rotted off) or otherwise damaged, any RG6 should work.btw I have some 2 cable copper rg6 75 ohm from the WB install years ago.I can use this for coax for FTA,no?
You can reuse any properly terminated RG-6 cable.i have one of those terminal tools that installs the coax ends..the ends with the blue plastic rings....can you re use those???
Do I just use the TV signal at its highest level or is there more to it??Looking at pics of WIld Blue dishes seems to show it fairly close to the reflector..maybe 4 inches away.And pointed low on the reflector. But that might be just for the ANIK freqs. and not applicable for Galaxy 19.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?