Software Updates for 501/508/510 and 625 receivers (Heads Up)

RandallA

Supporting Founder
Original poster
Supporting Founder
Dec 13, 2004
10,556
68
San Francisco Bay Area
1/8/2007: 1843 Software Version L4.13 for DVR625

Effective Tuesday, January 9th, Engineering plans to spool a PARTIAL PHASE of software version L4.13 for the DVR625 receiver. This is primarily a non-forced maintenance release available at ALL satellite locations.
At this time L4.12 and L4.13 will be the valid software versions for the DVR625.


1/8/2007: 1842 Software Version P3.64 for DVR501/508/510

Effective Tuesday, January 9th, Engineering plans to spool a PARTIAL PHASE of software version P3.64 for the DVR501/508/510 receiver. This is primarily a non-forced maintenance release available at ALL satellite locations.
At this time P3.63 and P3.64 will be the valid software versions for the DVR501/508/510.
 
This is the third time they've said that on version P364 makes me wonder whats wrong with it.

originally annouced
12/06/2006: 1103 Software Version P3.64 for DVR501/508/510
Effective Thursday, December 7th, Engineering plans to spool a PARTIAL PHASE of software version P3.64 for the DVR501/508/510 receiver. This is primarily a non-forced maintenance release available at ALL satellite locations.


At this time P3.63 and P3.64 will be the valid software versions for the DVR501/508/510

and then again here
12/11/2006: 1318 Software Version P3.64 for DVR501/508/510
Effective Tuesday, December 12th, Engineering plans to spool a PARTIAL PHASE of software version P3.64 for the DVR501/508/510 receiver. This is primarily a non-forced maintenance release available at ALL satellite locations.


At this time P3.63 and P3.64 will be the valid software versions for the DVR501/508/510.
 
They release it to some receivers to test them, (yes, we're their guinea pigs) and if they don't hear from customers then they release it to all receivers.
 
I see on two streams the L4.13 - check your serial number:

PID=0891h
Upgrading FW:
'L413': 'AAA1'- 'DPH1' 'L050'- 'L412'
'NONE': 'AAA1'- 'DPH1' 'L050'- 'L412'
'1417': '1[34]1[0-6]'
'AAA1'- 'DPH1' 'L050'- 'L413'
New FW:'L413'
List of BootStraps and BuildConfigs:
'1[34]1[0-7]' 'GA[E-HJ-LNPQST][A-DJ]'
IRD Model: DVR522
List of Serial Numbers:
[2] 1-4000000000
'1[34]1[0-7]' 'GJ[A-NP-Z][A-DJ]'
IRD Model: DVR625
List of Serial Numbers:
[2] 1-4000000000

PID=0895h
Upgrading FW:
'L413': 'AAA1'- 'DPH1' 'L050'- 'L412'
'NONE': 'AAA1'- 'DPH1' 'L050'- 'L412'
'1417': '1[34]1[0-6]'
'AAA1'- 'DPH1' 'L050'- 'L413'
New FW:'L413'
List of BootStraps and BuildConfigs:
'1[34]1[0-7]' 'GA[E-HJ-LNPQST][A-DJ]'
IRD Model: DVR522
List of Serial Numbers:
[2] 1-4000000000
'1[34]1[0-7]' 'GJ[A-NP-X][A-DJ]'
IRD Model: DVR625
List of Serial Numbers:
[2] 57510946-74652044
 
I'm seeing a lot of "lost locks" with this new version in my 625 receiver. I periodically check the Counters or System Info to see if my receivers are losing the signal. Before this version I always had (0, 0), now I'm seeing (16,18) lost locks.

Can anyone else confirm this? Did the software update make my receiver more sensitive to signal loss?
 
It's been pretty dry in California, so I don't think that's the cause. Besides the switch is inside in the garage. All other receivers are fine, I'm blaming this software update. As long as I can watch TV, I'm fine though.
 
I just had a phone call from dish network saying the p364 software fixes the missing timer issue. I'll believe that when I see it.

Dish also had me delete all my timers and reinstall them again. I had done this already before without success

The last thing dish told me was to not turn off my receiver, that it can keep my receiver from turning on to record the timer.
 
Last edited:

Attachments

  • seagulls.jpg
    seagulls.jpg
    3.9 KB · Views: 181
Did the 622's receive something? I woke up today to find my receiver reset, the modulator channel for tv # 2 was reset to 60, and the RF remote wanted the address to be confirmed again. Any ideas on if that got an upate last night Smith P ? ;0

-B
 

dish 1000 and a dp34 switch

Any New HD Channels Coming?

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Latest posts