Stereo audio on 3/4 RF out.

[viqventeur]

Does the 3/4 TV RF output port on the receiver send stereo audio. I heard that the TV2 RF output sends MTS stereo audio. I heard normally the RF on say a 311 only sends mono-audio sound using the RF port. To get stereo you must use the RCA cables. Why would this be the case if TV2 is getting the stereo sound? Thank you.

 

[BFG]

The only RF output that sends stereo audio is the TV2 output on the 522.

 

[SimpleSimon]

The difference is that TV1 is using old cheap VHF modulators that they found under an old RadioHut warehouse that burnt down. When they used the sledgehammer to bash the 2 tuners together, they found that the VHF modulators were too big to fit two of them in the case they designed, so they had to go spend a whole buck three eighty on the UHF modulators that happen to have MTS.

Having a little fun, but the story is somewhat accurate - lots of VHF mods are mono. Most UHF mods are stereo. Dunno why.