Tailgating with dish sling

JSheridan

SatelliteGuys Master

Lifetime Supporter

Feb 16, 2008

8,899

10,028

USA

• Oct 19, 2019

• #21

NYDutch said:

That works with an HWS? Or am I thinking of a DPP that needs a Node...

Click to expand...

Yes, a Hybrid works directly to a HWS. A DPP LNB would need two lines to a node then one to the HWS.

 

Reactions: NYDutch and charlesrshell

NYDutch

SatelliteGuys Master

Pub Member / Supporter

Dec 28, 2013

7,098

12,675

Where our wheels go

• Oct 20, 2019

• #22

JSheridan said:

Yes, a Hybrid works directly to a HWS. A DPP LNB would need two lines to a node then one to the HWS.

Click to expand...

Ok, thanks! I haven't done a DPH/HWS setup yet, so I'll keep that in mind when/if it comes up. I've done lots of DPP/HWS setups, including my own, but no DPH's on anything except H3's and Wallys.

 

Reactions: charlesrshell and JSheridan

T

Terry Lauderdale

Active SatelliteGuys Member

Original poster

Oct 17, 2019

18

3

MS

• Oct 20, 2019

• #23

Thanks guys. Stay tune. I’ll try again this afternoon. I think I have the coax going to the wrong lnb.

 

Reactions: charlesrshell

JSheridan

SatelliteGuys Master

Lifetime Supporter

Feb 16, 2008

8,899

10,028

USA

• Oct 20, 2019

• #24

Terry Lauderdale said:

Thanks guys. Stay tune. I’ll try again this afternoon. I think I have the coax going to the wrong lnb.

Click to expand...

Connect the coax to the far left port and you should be good to go.

I think your problem is probably the actual pointing.

 

Reactions: charlesrshell and NYDutch

NYDutch

SatelliteGuys Master

Pub Member / Supporter

Dec 28, 2013

7,098

12,675

Where our wheels go

• Oct 20, 2019

• #25

 

Reactions: TheKrell, JSheridan and charlesrshell

T

Terry Lauderdale

Active SatelliteGuys Member

Original poster

Oct 17, 2019

18

3

MS

• Oct 20, 2019

• #26

Ok. I’m back. Removed the hub and yes your correct it’s a hub. This is what the guy said I would need. I removed it as u suggested. Connect cable into position 1 of lnb. Not the “in”. I do a switch test and look at details. This is what I get. Please remember this receiver was originally setup in my house with no issues. It had 2 joeys on it. All I did was unplug and plug into a different dish Outside with no joeys. I am thinking that I should have it reprogram itself or something.

 

T

Terry Lauderdale

Active SatelliteGuys Member

Original poster

Oct 17, 2019

18

3

MS

• Oct 20, 2019

• #27

Switch details
Input 1-dp none
Input 2-dp none
Input 3 dp none

 

JSheridan

SatelliteGuys Master

Lifetime Supporter

Feb 16, 2008

8,899

10,028

USA

• Oct 20, 2019

• #28

Terry Lauderdale said:

Ok. I’m back. Removed the hub and yes your correct it’s a hub. This is what the guy said I would need. I removed it as u suggested. Connect cable into position 1 of lnb. Not the “in”. I do a switch test and look at details. This is what I get. Please remember this receiver was originally setup in my house with no issues. It had 2 joeys on it. All I did was unplug and plug into a different dish Outside with no joeys. I am thinking that I should have it reprogram itself or something.

Click to expand...

Is the dish aligned and pointing at the satellites?

 

T

Terry Lauderdale

Active SatelliteGuys Member

Original poster

Oct 17, 2019

18

3

MS

• Oct 20, 2019

• #29

Yes

 

T

Terry Lauderdale

Active SatelliteGuys Member

Original poster

Oct 17, 2019

18

3

MS

• Oct 20, 2019

• #30

I am tuner 1 sat 119 transponder 17.

 

T

Terry Lauderdale

Active SatelliteGuys Member

Original poster

Oct 17, 2019

18

3

MS

• Oct 20, 2019

• #31

On echostar 14.

 

JSheridan

SatelliteGuys Master

Lifetime Supporter

Feb 16, 2008

8,899

10,028

USA

• Oct 20, 2019

• #32

If your dish is aligned and you connect a wire from port 1 on the LNB to the Wally then run a switch test you should be good to go.

 

Reactions: charlesrshell and NYDutch

T

Terry Lauderdale

Active SatelliteGuys Member

Original poster

Oct 17, 2019

18

3

MS

• Oct 20, 2019

• #33

This is not A Wally. It’s a hopper w sling

 

JSheridan

SatelliteGuys Master

Lifetime Supporter

Feb 16, 2008

8,899

10,028

USA

• Oct 20, 2019

• #34

Terry Lauderdale said:

This is not A Wally. It’s a hopper w sling

Click to expand...

OK, doesn't matter. You have a Hybrid LNB so just connect the coax to port #1 and do a check switch.

 

Reactions: NYDutch and charlesrshell