U

Status
Not open for further replies.

KE4EST

SatelliteGuys Is My Second Home
Original poster
Staff member
HERE TO HELP YOU!
Lifetime Supporter
Aug 9, 2004
26,894
7,250
EM75xb
Uniden SQ530
 

Attachments

  • SQ530om.pdf
    1 MB · Views: 915
Uniden SQ560
 

Attachments

  • SQ560om.pdf
    5.2 MB · Views: 542
Uniden SQ590
 

Attachments

  • SQ590om.pdf
    5.3 MB · Views: 365
Uniden Super 2400 Analog Receiver
 

Attachments

  • SUPER 2400R-2410R.pdf
    2.9 MB · Views: 866
Uniden Supra Analog Receiver
 

Attachments

  • SUPRAom.pdf
    2.5 MB · Views: 627
Uniden UST4400
 

Attachments

  • UST4400om.pdf
    2.8 MB · Views: 501
Uniden UST4500
 

Attachments

  • UST4500om.pdf
    1.6 MB · Views: 764
Uniden UST-9000 Satellite Receiver System
 

Attachments

  • ust9000.pdf
    3 MB · Views: 314
Unimesh Dish

Unimesh Dish

Thanks for sharing! :)

Just to add:

In section 7 of this manual, the term "elevation angle" is used in a non-conventional way (so: in a wrong way) in the picture and chart. So this might be confusing.

Elevation angle or inclination angle is normally measured from the horizon towards which you are aiming, upwards.
Declination angle is normally measured from a plumb pole, downwards; or from the horizon that you are not aiming at, downwards.

So the angle marked "elevation angle" is in fact the declination angle for the rotation axis,
and the extra declination angle of 0 to about 8 degrees is conventionally called the declination offset angle for the dish (as it has an offset to the rotation axis). Though many people call this just the 'declination angle', for the dish.

The angle marked "elevation angle" is also often indicated as "polar mount angle", I believe.

The good thing is: the chart gives modified motor angles!

Greetz,
A33
 

Attachments

  • Unimesh manual.PDF
    1,009 KB · Views: 536
  • Like
Reactions: FTA4PA
Status
Not open for further replies.
***

Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)

Who Read This Thread (Total Members: 9)