vip612 will not hook uk up to internet through client bridge setup
- Thread starter dbmontana
- Start date
- Latest activity Latest activity:
- Replies 7
- Views 2K
Register to hide this ad
I had this same issue with my VIP 722. Do you have the DD-WRT software on the client router and the primary router? I installed DD-WRT v24 on the primary router and then it started working just fine with the 722. I also found that using bridge repeater mode seemed to work with fewer problems.
At the time DD-WRT v24 was only a few days out so there was very little info about how to set it up. Double check your DHCP settings and then reset the connection on the receiver.
At the time DD-WRT v24 was only a few days out so there was very little info about how to set it up. Double check your DHCP settings and then reset the connection on the receiver.
If its an old router you may just want to get another. I have the new Lynksis WRT310N that is flat and black, looks like something off Star Trek. I am getting a long enough cord and hooking the 612 to it this week and let you know if it works. I have a PS3 connected to that router via wire no problem. I was having lots of problems with a couple year old Belkin router and didn't have them with the new router. I find my routers only last 2-3 years and they start to have problems. On my 622 that is too far away I am using an older Lynksis game router, a solution for those with DVRs all over the house.
