Weird Problem

[ralfyguy]

On my 722, when I go to Menu-6-1-3 for the System Info screen, I come up with an error for the 129 sat, saying I lost signal several times, yet in the Point Dish screen is no error at all. A check switch does not come up with an error either. All is good. Clearing the matrix and rerun check switch turns out good also. Still the system info screen shows an error on 129. And the lost locks are not counting up either, under Menu-6-3-Diagnostics. Channels on 129 are not cutting out either, the weather is fine, and the lowest SS on 129 is 39, highest 57. This doesn't make sense.

Anybody have an idea what's going on?

 

[Liquidforce88]

BS Reading. Just ignore it.

 

[Jim5506]

As long as you are not losing signal on 129 don't sweat it.

Watch for LNB drift on 129.

 

[ralfyguy]

As long as you are not losing signal on 129 don't sweat it.

Watch for LNB drift on 129.

That's the weird thing: No LNB drift displayed. This is a 1000.2 with the new style triple LNBF, installed about 6 months go.

 

[old corps]

I've had the same thing show up a couple of times myself for no known reason. Go figure.

Ed