I moved from an apartment to a townhome, I have one 922 that serves 3 TVs (where only 2 at most are used).
The receiver is in the living room downstairs and it works fine in there as well as in my bedroom directly upstairs, in the back half. But the other bedroom is on the front half upstairs.
Sometimes you have to press a button twice or three times. Then you are rewarded with having that button press repeated sometimes 10, 15, or 20 times. One time I saw the entire guide scroll by TWICE and I had set the remote down on the bed and no one was touching it!!! It is NOT the 922 it's self, they just replaced it, and even the original 922 I got brand new did this crap. I just assumed there were too many Wifi networks in the old apartment and that the problem might clear up after I moved.
I remember 10 years ago at my mom's house we had a 501 with the UHF remote. It never did garbage like this. Either the button worked or it didn't but it NEVER repeated it 15 friggin' times.
If I waste another 20 minutes I could probably move the receiver from the far end of the living room towards the middle of the apartment and that MIGHT reduce the errant button presses from 15 or 20 times down to maybe 5 times repeated. I have heard of a UHF antenna extension but I don't even know how I would set that up. The 922 is already almost on top of a bookshelf as close to the ceiling as I can get it.
Whoever did these remotes was smoking dope and did no testing whatsoever.
The receiver is in the living room downstairs and it works fine in there as well as in my bedroom directly upstairs, in the back half. But the other bedroom is on the front half upstairs.
Sometimes you have to press a button twice or three times. Then you are rewarded with having that button press repeated sometimes 10, 15, or 20 times. One time I saw the entire guide scroll by TWICE and I had set the remote down on the bed and no one was touching it!!! It is NOT the 922 it's self, they just replaced it, and even the original 922 I got brand new did this crap. I just assumed there were too many Wifi networks in the old apartment and that the problem might clear up after I moved.
I remember 10 years ago at my mom's house we had a 501 with the UHF remote. It never did garbage like this. Either the button worked or it didn't but it NEVER repeated it 15 friggin' times.
If I waste another 20 minutes I could probably move the receiver from the far end of the living room towards the middle of the apartment and that MIGHT reduce the errant button presses from 15 or 20 times down to maybe 5 times repeated. I have heard of a UHF antenna extension but I don't even know how I would set that up. The 922 is already almost on top of a bookshelf as close to the ceiling as I can get it.
Whoever did these remotes was smoking dope and did no testing whatsoever.