Vbox 7 er2 message on tw Vboxs and two actuators

Status
Please reply by conversation.

Cnut

SatelliteGuys Family
Original poster
Jul 2, 2014
62
28
I am getting the no signal from sensor, ER2 message on two different Vbox 7s, when trying to go east or west. I have reset both boxes three times each and swapped out my actuator for a new out of the box actuator and I still get the same ER2 error messages when trying to move east or west, with both actuators installed.
Has this ever happened to anyone else? Any ideas what the problem could be?
thanks
cpsp0
 
Has to be wiring then. Take the lose actuator and a VBox and hook them up with a short wire on the kitchen table and test them out.
 
Yeah with it happening on two boxes, it must be wiring. Err2 means it is not getting a count feedback.
 
My vbox7 just started doing something similar. Mine will move to the east but not west. If i reverse motor wires on back of vbox it will move east but not west. Not sure if its actuator or vbox.

Sent from my SCH-I535 using Tapatalk
 
My vbox7 just started doing something similar. Mine will move to the east but not west. If i reverse motor wires on back of vbox it will move east but not west. Not sure if its actuator or vbox.

Sent from my SCH-I535 using Tapatalk
Sounds like the box in your case. My guess a relay or driver transistor has failed for one of the relays.
 
  • Like
Reactions: dl76 and Titanium
Ok thanks ke4est. Hopefully i can return it for another one. It seems to work when it warms up during day. But rain or cold weather it gives error. Tax money comes in. Im getting the dish postioner you and titanium sell.

Sent from my SCH-I535 using Tapatalk
 
  • Like
Reactions: Titanium and KE4EST
Status
Please reply by conversation.
***

Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)

Who Read This Thread (Total Members: 2)