Lost 129

I was watching the Golf Channel in HD and it went out with notice of complete signal loss and switched to SD version. Now it is back.
 
  • Like
Reactions: dishdude
I've lost 129, 119 and 110. I checked signal and 129 would come in at good signal and I switched to local channel 7 out of Omaha. then lost it. now I don't have anything except for my ota in the 211k unit. chas
 
When the upload site loses signal, should my download signal strength go down?

PLEASE LOG IN TO GET RID OF THESE ADS!
 
the satellite is not sending me signal or my receiver is bad or my dish is not pointed correctly. I checked all the connections and I can still get the ota channels. this happened several times for a minute in the last couple of days. now it is gone. when I check satellite signal with the receiver, I get no signal. it came back several times, then lost it all now. I have switched to the c band satellite now for various programs. chas
 
the satellite is not sending me signal or my receiver is bad or my dish is not pointed correctly. I checked all the connections and I can still get the ota channels. this happened several times for a minute in the last couple of days. now it is gone. when I check satellite signal with the receiver, I get no signal. it came back several times, then lost it all now. I have switched to the c band satellite now for various programs. chas
Contact Dirt or call Dish.
 
dish took me through the testing. no signal on any satellite. dish is sending out tech on Saturday. chas

PLEASE LOG IN TO GET RID OF THESE ADS!
 
If the satellite isn't receiving a signal there is absolutely no signal for it to send so it cannot send.
 
Me too, but I could tune to my LIL's on the spot that are sent from the spot up-link in Washington State, so I figured it was an issue at Cheyenne or Gilbert. I was able to get SOME ConUS, but not CNN and a few others, but my LIL's were never lost. Glad the pain is over.

PLEASE LOG IN TO GET RID OF THESE ADS!
 

Hopper 3 Install was a fail

Hopper 3 remote and soundbars

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Latest posts