Replacement for a switch

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE

whatchel1

SatelliteGuys Master
Original poster
Sep 30, 2006
9,098
51
Great High Plains
Has Dish come out w/something to get rid of a switch? I have 2 large dishes w/LNB's going to a switch for EA. They are coming into the 722 on 1 RG-6. Would like to go to a Hopper but now I'm locked out of using one due to the switch. Is there now finally something that will work to go into the newest version of the Hopper?
 
Has Dish come out w/something to get rid of a switch? I have 2 large dishes w/LNB's going to a switch for EA. They are coming into the 722 on 1 RG-6. Would like to go to a Hopper but now I'm locked out of using one due to the switch. Is there now finally something that will work to go into the newest version of the Hopper?
The dph42 switch would allow you to use multiple dishes for a hopper 3
 
Well, may have them do a "standard" install w/an EA dish. Order 1 of these so that right after they leave I can go back to my oversize dishes. Also have to do some moving. I have both my service address and billing addresses as different locations.
 
I would tell them that you want to keep the 2 larger dishes because of rain fade and have them do the installation with the new DPH42 switch. That way they supply the switch.
 
  • Like
Reactions: HipKat and rjruby
I would tell them that you want to keep the 2 larger dishes because of rain fade and have them do the installation with the new DPH42 switch. That way they supply the switch.

A local retailer doing an upgrade would probably do that but I don't think that's an 'approved' DISH installation. :)
 
I would tell them that you want to keep the 2 larger dishes because of rain fade and have them do the installation with the new DPH42 switch. That way they supply the switch.

A local retailer doing an upgrade would probably do that but I don't think that's an 'approved' DISH installation. :)
Then the two dishes must be used for line of sight issues. ;)
 
  • Like
Reactions: JSheridan

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Latest posts