Recent content by azcoder

JDavid22 I have sent you a new qt zip file. Unzip it in the same directory as the MapMaster.exe file and you should be good to go. Good luck! Jim

I sent you a message with my e-mail address. The Google web site that used to host the file is no longer supported by Google. I dug around my system for the files, so I can send them when you provide me your e-mail address. Jim

No signals here in central Arizona either on a 10 dish.

Just for reference, here are the satellite maps that were in the 4dtv when Motorola quit support. The third entry in the lines starting with SIT is the satellite position. The file posted above is from the MapMaster site just like this one is. Jim

Try this link http: http://images.mynonpublic.com/openatv/nightly/index.php?open=azboxme It is the link for OpenATV.. They are the current winners for ME support. Jim

If your unit was in working order, just hook it back up. You might want to get as close as you can to the satellite you were on when you took it out of service. DO NOT DO A MASTER RESET! You can find subscriptions here: http://www.programming-center.net/ They will be on available on X4. You...

Hello all, A new version of the 4DMapMaster Restoration is now available. It is at the same place as the original version. If you do not know where that is, send me an e-mail for the URL to MapMasterWizard (at) gmail.com and I will send it via return mail. We continue to move forward with the...

There are lots of posts that cover this, so you should spend more time getting information from those that came before you by reading as many as you can. Go here: https://sites.google.com/site/4dtvmapmaster/map-master-zip-files and download the "9_New Motorola Maps.txt" if you have not done so...

I hope you ordered the USBBDM cable, not the jtag cable! It looks like this:

Anony55, Both of the instructions tell you to do the same thing. After the firmware is loaded into the receiver, the receiver must be power cycled, i.e., pull the plug, wait a few seconds, and plug it back in. Then do the "reset 1" & "g". Either the firmware installs or it doesn't. If it...

Anony55, I will take all three. The UID does not bother, it cannot be read or written, so it does not matter what it is. It only matters if you want to subscribe. Please mark the A4 downgrade nvrams as before & after. And thank you for your support!

It looks like there is about 35-40 new MapMaster users out there now. I hope you have all been able to get new maps loaded to your receivers and get all the channels that are available. The MMR project team has been working on a new release of MapMaster and needs a little help getting virgin...

Anony55, The 922 EC firmware uses an updated time structure in the nvram from what was used in the A4 firmware. When you went back to the A4 firmware an A4 version of the time structure was created on first bootup. It is zero and so you are on UTC time and have no timezone information. This can...

Scott, You did everything right and thank you very much! The first post on this topic included the link to where the files and instructions are stored. There has been updates to the documentation on the MM file site to make things even easier for everyone. It is just that some people forget to...

I am sorry you had such a hard time. The original announcement was at fridgefta.info under the 4DTV forum. Reading those threads would have been a BIG help to you and saved you loads of time. We spent a lot of time creating documentation to make the task easy. All the file locations are there...