Recent content by Azel

Tried Firmware 07012011 and it still wouldn't scan 'em in so I guess I gotta learn to edit channels. Going to craw back into the woodwork now. Oh, this was for an OpenBox S9.

Thanks for all the help. I read elsewhere that Using Firmware HDS2-10-07-11 , and blind scans work fine on the S9 for NBC & Fox I didn't see an upgrade with that date in the files section.

Can someone point me to a post that has ALL the info for channel editing an OpenBox S9? Do I download an editor and and use a thumb drive to transfer? I deleted all my 99W channels and re-scanned and now there's a lot of channels missing besides NBC & FOX.

It looks like NSS 7 at 22.0°W would be a good place to start.

Maybe this was brought up before. I have found the LO (Local Oscillator) of my analog receiver connected to the Loop Out will interfere with the digital receiver (and visa-versa).

Need a picture or more info. Some perf. dishes can be disassembled while still on the poll. The entire dish is allowed to spin while the panels are unbolted at the bottom.

I'd have to look up the author . In his design, he said the holes need to be less than 1/10th wavelength in diameter. That works out to 0.1 inch (12 GHz).

Hello. Maybe you haven't set up the receiver. First go to the antenna setup menu and define a setup for G25. The important thing is to define if it is a Standard or Universal LNB. You haven't mentioned the type in your post, so try both. Also be sure the LNB power is "on" in the menu...

Interesting. I've heard that most stations use a service connected by fiber to insert their commercial breaks. Really cuts down on operating cost. Not sure how it can be done over phone lines.

I found something interesting with my new 180CM Fortec Prime focus C-Band Antenna. I aimed between G25 and G4 and get nearly everything on both birds. I get KCSG , BYU, the Nets on G4 and even Casper. The Casper channel quality is about 45 - 50% but never breaks up. All others are much...

Maybe easier to connect the C-Band receiver to the Loop-Output of the Digital receiver and connect the C and KU dishes to the switch. The C-band LNBF would would need to be a newer model with 15-16V Polarity switching. I may have missed something. Somebody help me.:)

The smaller dishes are 30 inch C-banders. They are for narrow band data pay services. Some were used for Stock Market tickers. The one I have was used for GOES Weather satellite data. It was distributed this way before the internet. I removed the receive box underneath an adapted the...

G4 is now Called G16 @99 deg. WesT. I suppose your looking for the networks on the Virgin Is. Mux and possibily NBC in Casper. I have gotten good reception of both of these with a 180cm (6 foot) prime feed dish. The basic dish comes with a crude mounting base and is mounted pretty close to...

Couldn't leave "well enough alone". Now gets 97, 87, 93 and DirectTV@101. I swear this dish has more gain than my 1.2M.

I am using one of those dishes and it works the best (for it's size) of any dish I've owned.:) My LNB is single polarity, 10.7 GHz LO, and receives all the normal KU stuff.