Recent content by hanson

  1. H

    Caribbean MUX on Galaxy 16C (99W) gone

    i have a 39 x 36 round primestar dish,using a c-band lnb and a analog receiver i was able to get shepard's chapel and a couple of wild feeds. when i switched to my fta stb,i got nothing after i did a blind scan. any suggestions?
  2. H

    home direct satellite receiver

    found a home direct receiver with videocipher rs,has c and ku band hookup,and a channel master videocipher-2 descrambler. are these of any use?
  3. H

    pbs on G-28

    i can't get the pbs channels on g-28. i manually entered the transponder(3754 h 4444) but there's no signal. transponder 4060 h 2800 has 60-70 % signal and scans in fine. using a coolsat 5000 and 10 ft. mesh dish.
  4. H

    Caribbean MUX on Galaxy 16C (99W) gone

    did a blind scan. got 'em back in. thanks
  5. H

    Caribbean MUX on Galaxy 16C (99W) gone

    networks gone? are the nets gone off 99 degrees west? i've still got the other channels,but the nets are showing no signal.
  6. H

    hooking c & ku together

    yes,have a coolsat 5000 &10 ft mesh,just put up a direcway dish that i've got pointed at 101.
  7. H

    hooking c & ku together

    can i hook my c-band dish and a direcway ku dish together using a diseque switch?
  8. H

    need help with antenna

    i live in southern ky,what type of antenna should i get to get channels about 100 miles away? would i need a booster,and high should i put it
  9. H

    what happened to CBS?

    the CBS channel on g4 is now this tv,what happened?
  10. H

    signal spikes,then drops

    trying to get amc4 at 101*,i get 99* &103* just fine,but when i do a blind scan on amc4 several trans. will spike to around 90%,then drop to 0. i've moved the dish back and forth,still the same. got a good line of sight. using 10' mesh dish,calif. lnb, and coolsat 5000.
  11. H

    channels missing on g-3

    a guy from a local satellite dealership told me to just run a jumper from the loop out connection of the fta receiver to the analog box,is this info correct?
  12. H

    channels missing on g-3

    if i use a dc block,any certain size i should use?
  13. H

    channels missing on g-3

    i have two splitters,0-900 and a 5-600,which one would i use?
  14. H

    channels missing on g-3

    it's a california lnb,at least 10 years old
  15. H

    channels missing on g-3

    do i need to hook both receivers up in order to receive h and v polarity?
See more
Top
Back