Recent content by Pepse

I do know that I have no power where the M1/M2 leads connect. I know that this box is actually a General Instruments 450i Super. Unless someone has a clue as to a possible repair to this area I am wondering if that part can be replaced with parts from a G/I 350i Super? I would like to try to...

Well, I took out the GI 350i and replaced it with a Uniden UST4600 because it has a KU hookup. Big mistake so far. I cannot get it to set my East and West limits. I downloaded the manual from Uniden which is where I was able to get a clue on getting to the second screen. But like I said I...

The reason I asked about getting the the analog C band Sats is when I was playing with the DVB card this last winter/spring I was told that because DVB is a rather narrow band if I'm a little off in my arc I probably won't get anything. And setting Sats with a GI DSR 922 is easier than this old...

At first I thought maybe there are no more analogs channels but I searched around here and found out there still are a few. I don't have a 4DTV receiver any longer but, I have 2 old analogs. The GI as mentioned in my header and a Chaparral Monty 55 (that needs work). Anyway I hooked up the GI...

I thought that DVB-S2 is for HD and DVB-S for SD? Pepse.

Well as for the Twinhan 102g I still have it. I realized that when I got a channel on Galaxy !0R it is an HD channel and my Twinhan is only a DVB-S card. So, I just gotta get back out there and try some other Sats. But I think my splitters might be causing some of my problem so I am going to...

:) Yeah, I get that too. Is Monster Cable a good brand for splitters? I mean they've been around for what? 15 years? And think they were primarily car audio when they started. So, I guess I'm kinda leery that they have and know about Satellite/cable/FTA. Later. Pepse.

As for your first reply, thanks that is understandable. As for your second reply, I have a GI 4DTV receiver NOT a DVB receiver, so I should only need the 1X2 High Freq splitters. Later. Pepse.

Nothing in the FAQs covered my question so here goes. I know from reading here and there, more there than here, that with the setup I have: A 10Ft SAMI dish KU & C LNB's, a GI 4DTV receiver, 2 splitters, a 4x1 DisqeC switch, and a Twinhan 102g (sic). Okay I know that I need 2 splitters. What...

Well, I got the Twinhan 102g Thursday. It has issues in windows XP. After intalling the drivers and software I get an error of: CANNOT SUPPORT THE CARD OR DRIVER, PLEASE CHECK THE HARDWARE INSTALLATION. Well I tried the card in the other 2 PCI slots and got the same error. I e-mailed the...

Thanks, at least I know I am not alone on this card. I will try your ideas whilst I am awaiting my Twinhan 102g. As usual My being cheap does tend to show:o. Later. Pepse.

This ADS Tech card seems to be a POC as Progdvb doesn't recognioze the PCI card. It's there as Linux sees it. So, I decided to order me a Twinhan 102g DVB card in hopes that it works. But in the meantime I will try to find some other sites similar to Progdvb and see if any of them will see my...

Sorry it's been a while. What I did was I tried to make a folder and put that text into it but that wouldn't work. But I found that text in Kate (Klipboard) and it created a text file (folder?) on my desktop so I went to a Konsole and I changed directory to "Desktop" and had it scan? that...

Okay, I "think" I have it figured out. If I understand what happened when I did some scans of Galaxy 19 and Galaxy 10R my Satellite needs tweaking/tuning. Here is the result from Galaxy 10R: jim@jim-desktop:~$ S 11720000 V 27692000 AUTO bash: S: command not found jim@jim-desktop:~$ S...

Well, that didn't work. I created a File called Galaxy 19 and with the use of Kate I pasted your command into the File. Here is the answer: scan -o zap -l 10750 Galaxy19 scanning Galaxy19 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' ERROR: cannot open 'Galaxy19': 2 No...