Recent content by shakti

  1. S

    Combining TV2 Output with Time Warner digital Cable

    Ordered the LPF-750 as well just in case;)
  2. S

    Combining TV2 Output with Time Warner digital Cable

    thank you, ordered one from amazon, let's see What channel are you sending the TV2 output on. Want to mimic your setup as much as possible to see if it works here in So.Cal :up Now if I could afford the ZvPro 250 that would be icing on the cake http://zeevee.com/compare-products
  3. S

    Combining TV2 Output with Time Warner digital Cable

    No diplexers don't work, actually they are used only to combine SAT signals and Cable/UHF signals, then using another diplexer downstream to parse them. I do this to use the same cable wiring to send both SAT and TWC signals to my TV. I can't throw TV2 signal into that mix. I think short of...
  4. S

    Combining TV2 Output with Time Warner digital Cable

    Title says it all. I wanted to combine the TV2 output from the 722 along with Time Warner Cables' digital cable signal (I have them for basic cable and my internet). Tried di-plexer's (the one with the SAT input and the Cable/UHF input) and just the regular combiners , but no go. TV2 output...
  5. S

    Combining Dish TV2 feed with Comcast / Road Runner Digital Service

    So how can I combine a DISH 522 TV2 modulated signal with a Comcast or Raod Runner Digital service. Back when I had only basic cable this was not a problem. Because basic analog cable would not interfere with the TV2 modulated signal and as long as you found an unused channel within the 21-69...
  6. S

    Combining Dish TV2 feed with Comcast / Road Runner Digital Service

    I am trying to combine my DISH 522 TV2 feed which can be modulated to any range 21-69 or 73-125 with a Comcast digital service feed (since I have only one wire run to two of my TV's upstairs) but have no luck. My TV has a digital ATSC/QAM tuner along with an analog NTSC tuner and I first...
  7. S

    522 TV2 feed into 811 receiver

    Thanks. It was the input, I chose cable, should have left it at the default which is OTA
  8. S

    Combining Dish Modulated signal with Comcast Digital

    I am trying to combine my DISH 522 TV2 feed which can be modulated to any range 21-69 or 73-125 with a Comcast digital service feed (since I have only one wire run to two of my TV's upstairs) but have no luck. My TV has a digital ATSC/QAM tuner along with an analog NTSC tuner and I first...
  9. S

    522 TV2 feed into 811 receiver

    Since I had no luck combining the comcast digital cable signal and the 522 TV2 feed (tried several channels on both AIR and Cable, with no luck, there is always interference), I have decided to run the TV2 feed by diplexing and having it piggy back on the 811 sat feed. Now my question is at the...