Recent content by tvrocker2k5

I Got My Wing Dish Today! I got my wing dish today and the pictute looks great! However, I tried watching a lil bit of WAFF tonight around 7:30 and the picture kept freezing up on me, like it wasn't getting a signal all the time. Has anyone else seen this problem with H'ville HD locals...

Yesterday, I upgraded to the Vip622 and was told that "due to the popularity of this unit, there would be a 30 day delay before it would be installed" however, I should receive my "empty return box" in about 2-4 days for returning my 942 to them. I have read several posts from different...

Hey everyone, I'm not sure that this has been mentioned yet, as I did a quick search on here to see if it has and to the best of my knowledge it hasn't. Anyway, I received this months bill from DISH and it says that starting May 31, 2006 Starz Comedy is coming to DISH and that it is replacing...

I have 5 receivers in my household and so not all the rooms that they are in have phone jacks and if there are jacks they are not in a convenient place. I decided to go ahead and buy one 'Phonex" to see if it worked. It worked great without any problems, including the caller ID feature...

I just went through this with my own setup last week. I can verify for you that the legacy receivers WILL NOT work by themselves on a DPP44 switch. You must have at least one DP receiver for this to work. I tried using 4 legacy receivers on a DPP44 switch and the power inserter on switch...

Hey everyone, I have been trying to get one of my legacy adapters to work with just a DP34 and a DP Twin LNBF and a DISH pointing at 61.5 and another DISH pointing at 119 and 110. The problem I am having is that my 2800 with a DISHPro Adapter connected, only sees the even transponders. Here...

Hey everyone, I had reported on Saturday the above problem. However, yesterday I lost power for about three hours. I decided I would try and see if I was still having problem with changing the aspect ratios on SD and HD programs. Lo and behold, I couldn't get it to act up. Which leads me to...

942 Locks-up and Reboots! Since I have received the new update, my 942 locks-up and then reboots on it's own, whenever I change the aspect ratio while watching a show that has been recorded. Ex. If I want to watch a recorded SD show, and I have the aspect ratio previously set for 1080i and...

Does anyone know what the output voltage of the DishPro legacy adapter is? I want to plug it in to the wall without the LNB's attached and just a legacy receiver attached. I want to verify that the adapter is good. I bought it used!!!!

Thanks everyone for all your assistance in this problem. Is the DPP44 that picky as to which kind of legacy receiver is connected to which port????

I realize that the 7200's and 2800 are not Dishpro compatible, but I am using a Dishpro legacy adapter that is supposed to correct this problem with using a DP34 and a legacy adapter...correct????? This is what has me stumped!

Yes...in fact they are all RG6 cables that are only about 8" long.

I have five receivers total (3-7200's, 1-942, & 1-2800). I have a DPP Twin LNB for the Dish 500 and a DP Dual LNB for the Dish 300(61.5°). I have the 942 connected to port 1 and I have the power inserter on this port as well. I have three of the other legacy receivers connected to ports 2-4...

First off, even though the installation manual for the DPP44 says that "any DBS satellite" on ports 1, 2, or 3 will work, does not hold true when you are using a DPP Twin LNBF and a DPP44 switch. According to the installation guide for the DPP Twin LNBF: "The DISH Pro PLus Twin LNBF can be...

Hey everyone, I am trying to set-up a 7200 with a DPP44 switch. I have two other receivers (942, 811) and the switch works fine for them, but when I try to get the 7200 to see the switch, I get "no switch box detected". I have three orbital slots that are hooked up to the DPP44. Port 1: 119...