Recent content by WhoRay85

  1. W

    Question about install today

    I can't even begin to count the number of service calls I do that the fittings or cables need to be changed. I recabled a 4 receiver house today - it had a huge crawl space (I could stand up under the house) and the existing cabling was wrapped around the house with RG-59.... The only thing I...
  2. W

    Frustrating SWM tuner drop issue

    Without testing it myself, the SWM splitter (1x4) may be bad. Just a guess, but if it is, it will likely start failing on the other receiver's soon as well.
  3. W

    hr24dvr and 2 lines

    That will work fine - but, you got the SWM LNB to avoid the 2nd line..........You need nothing else except a 2nd BBC. Remember to remove the BBC's when you fire up the SWM LNB.
  4. W

    Question About Converting to SWM

    2 way SWM splitter will run 2 HD/DVR's (4 tuners). No more than 8 tuners to a SWM LNB. If you have a 2 way downline, must have 8 way closest to dish. Will work with 4 way splitters...for awhile.
  5. W

    technical advice needed

    all evens on 103ca are 0 not bbc problem - ca does not require bbc to come in. 99 and 103 cb require bbc. only evens are 0- center conductor corrosion. Plus I can change tilt about 6 degrees and not lose 119, not so for 99/103.
  6. W

    technical advice needed

    If you're seeing zero's on all even's for 103, I would suspect corrosion in a connect on the feed to the multiswitch 103 18 volt input.
  7. W

    Errors on both tuners HR23/700 Sat 99 and 103

    BBC's are not required for any SWM installation. Check tilt for your area and adjust accordingly. repeak via same method.
  8. W

    technical advice needed

    Your dish needs to be aligned properly. Sounds like your tilt is off a little. If you could post your signal strengths it would help alot.
  9. W

    SL5 LNB

    Green does MRV, others don't.
  10. W

    A problem with my service...

    Also check your signal levels. If your odd transponders all show 0's, I would guess that the cable running to it needs to be replaced.....if your even transponders all show 0's, I would check to see which fitting has the corroded center conductor..
  11. W

    Record Symbol with an X

    Cool. HAven't tried it yet - wife is watching something on the DVR. OP - can you check your 'manage recordings' in the menu and see if there's anything else going on? just saw your reply - - probably a repeat or already recoded then...
  12. W

    Record Symbol with an X

    Don't think it's new, but, I think you're spot on with the repeat, already recorded or #3 priority.
  13. W

    Record Symbol with an X

    sure I can. select 3 series to record that will all broadcast an episode at the same time..
  14. W

    Record Symbol with an X

    Correct, which means that with only two scheduled to record, you will not see the orange X
  15. W

    Record Symbol with an X

    Add a 3rd show to the same time slot to see what happens