Search results for query: *

Hi, I would like to know if it is possible to use a DiSEqC 2.0 2x1 switch with a DiSEqC 1.2 compliant receiver? Thanks dplus

Receiver Hi Iceberg, Actually I'm not sure. I just can see a legend that says DVB receiver, DisEqc 1.2 compliant. I can't see anything else on it. About the 2x1 DisEqc switch, I think it will work because if I enable Tone Burst Sat A or Sat B, I still can move the motor without a...

22 Khz switch Thanks Brian, Then I think you are suggesting me to use a 22 Khz switch instead of the 2x1 DisEqc switch. My biggest concern with the 22 Khz switch is the power. I have seen some types of switches that may block the DC signal going to the LNB for polarity selection. For...

Hi, I have a FTA receiver that is not able to handle motor and DisEqc 4x1 switch at the same time. My current configuration is: 1 circular polarization LNB HH Motor What I want is to add a Standard LNB to the existing LNB, but still have the ability to move the motor. My receiver...

Pas-9 Actually, I'm trying to see a channel called 3ABN. This channel is also in Pas-9. Here is the parameters shown for this channel. 3ABN on AMC-4: KU Band Position: 101° West Transponder: 6 Frequency: 11,822 MHz Polarity: Horizontal Symbol rate: 5.700 Ms/s F.E.C.: 2/3...

Standard or Universal Thanks for the advice. I'm assuming that I have to look for the standard not the universal. Is it correct?

I would like to see the Free to air channels on AMC-4. I have a dtv LNB. This LNB seems not to work for this sat since my LNB is circular polarization and AMC-4 is linear feed. What kind of LNB do I need to get this sat? Could you please provide me with model or how to look for it? Thanks all

Recommendation Thanks Brian for your answer. Which one do you think is better? Or what advantages have one over the other? Thanks

Switches I have seen some switches that offer switching capabilities using either 0/12V or 22kHz signaling. Do you think this also help me to switch the LNB's without the use of an A/B switch? Also, how is the receiver controlling the motor? is the receiver using 13/18V signaling? Because if...

Cables Pbs, Yeah, you're right. It is easier to have the A/B switch near you, but then from the A/B switch you run another cable to connect to the motor, right? Or is there another configuration you recommend to me? Thanks

About Receiver PBS, Thanks for your fast answer and thanks for the welcome. When I get into the settings for my dish I have the following settings for DiseQC: None, Motor, USALS, DisEqc A, DisEqc B, DisEqc C, DisEqc D. So it mean that I might not be able to control both separately...

Hi, I have a question about my motor and DisEqc 4X1 switch. Currently I have one FTA receiver connected with HH Motor and circular polarization LNB. What I'm looking for is to add (strap) a linear LNB (beside the main focal LNB) to the configuration so I can catch on linear feeds of some...