Search results for query: *

  1. laurienicol

    Ku motor recommendations

    I switched from thee SG2100 to the Stab HH120. I had changed up from a 90 cm dish to a 120 cm dish, and the extra weight was causing the lighter motor to loosen up. The Stab also included USALS which made aiming a little easier, although it needed tweaking. The downside of the Stab HH120, was...
  2. laurienicol

    KU 97W Missing channels.

    97W is coming in strong for me. But..Is EBRU missing? I get a 68% quality (good reception) but a blank or black screen for the last couple of days. Oh well, the Dr. Who were reruns anyway. PS I chopped a foot of the top of my mast. The HH120 motor lifted the dish too high and it is now more...
  3. laurienicol

    OETA - Gone?

    I haven't been able to get the Montana PBS for a while (125W, 12106/2398). Is it missing as well or just powered down for a season? 4 ft dish in Ladner BC
  4. laurienicol

    OETA Gone?

    I have no signal on the OETA channels (125W, KU band, 12113 V 08704). That in itself is not unusual if they are temporarily off the air for some reason. The other stations on that bird are still strong. What is odd, is that the OETA stations are not listed in the FTA listings...
  5. laurienicol

    1.2 m Dish - Greater Toronto Area

    I'm having a similar problem. Glorystar sells (reluctantly) the GeoSat 1.2 m dish. but to ship the $200 dish here to Canada it's an additional $200. Drop shipment to just across the line in the US is almost as expensive. On a brighter note Dr. Sat says it will be introducing it's own brand soon...
  6. laurienicol

    Avenger pll lnbf

    That worked. However I didn't find any difference in signal strength or stability over the GeoSat PLL LNB
  7. laurienicol

    Avenger pll lnbf

    I just bought one too (Avenger PLL321S-2) and I also have Zero signal. For $10 it was worth a try. I've got the GloryStar setup (Geosat Pro 1200) with the GeoSat PLL. I put the GeoSat PLL unit back in, and everything is fine again. I lined up the arrows on the Avenger just like the GeoSat The...
  8. laurienicol

    No support at GloryStar

    Got this back from Satellite AV: "I hear your concern. I am willing to help you with any of the issues. GEOSATpro is working on the manual as we speak. We can not provide you ETA for the manual. If there is any issue, we will address it right away........ Glorystar does not offer advanced...
  9. laurienicol

    No support at GloryStar

    I have a timer issue with my new GEOSATpro HDVR1200. Glorystar does not offer any support for the receiver beyond the set-up for Glorystar on Galaxy19. Nor will they give me any contact information for the GEOSATpro people to help me though the timer issue. They told me that they were the...
  10. laurienicol

    GEOSATpro 1200

    GeoSatPro 1200 receiver. Tuesday night (11Feb14) The timer got hung up. I finally tried the factory reset but to no avail. It wiped out all my satellite positions. It took me 4 hours to find them all again. So, I called the Glorystar helpdesk. Complained about no manual. The girl on the phone...
  11. laurienicol

    No control to GeoSatpro HDVR1200

    I got it sorted out. When I did the factory reset, the output was changed to HDMI from the component cable I was using. Switched it back to component, and bye-bye black screen. The factory reset had restored the missing pre-set frequencies. laurie
  12. laurienicol

    No control to GeoSatpro HDVR1200

    Thanks for the help. I got it sorted out. When I did the factory reset, the output was changed to HDMI from the component cable I was using. Switched it back to component, and bye-bye black screen. The factory reset had restored the missing pre-set frequencies. laurie
  13. laurienicol

    No control to GeoSatpro HDVR1200

    The pitfalls of no proper manual for the Geosatpro HDVR1200, I erased the TP settings for Galaxy 18. The microHD manual suggested that I could get them back by doing a factory reset. What I have now is a black TV screen, a green light and 00 00 on the receiver, and no reponse to the controls...
  14. laurienicol

    No control to GeoSatpro HDVR1200

    I screwed up again. I erased the TP default values and to try to get them back, I hit the factory reset. Now I have nothing. A black screen, a green light on the receiver, and 00 00. Nothing works. Do they have to sell me a new receiver to start all over. Arrgh. I'll have to wait to Monday to...