Search results for query: *

Looks to be a Triax dish. Should be a good performer its similar to the Patriot PTX series. I have a Patriot PTX-110 it works great. Here is a link to Triax's website.. http://www.triax.dk/ifs/files/triax/is/presentation/home/Satellite_x_terrestrial/dth/ada/Dishes/TD_Dishes/TD_Dishes.jsp

Yes, anything that is analog in the clear you can receive without a videocipher module.

Like gizzer777 mentioned hook the 920 up to a television. After if powers up and the warm up goes away on the receiver display turn the receiver on with the remote. Hit the options button on the remote then 6 and then 5. The system status screen will pop up. Line A is the Unit ID. This...

I'm getting it at 44-46% quality on a Pansat 2500a with a 10' mesh dish in Michigan.

Good post tdti1.

A master reset is done using the hidden menus of the 4DTV. The master reset basically puts the 4DTV back to factory defaults. You will lose all of your settings. There are two ways you can approach it. You can record all of your current settings and input them after the master reset (sat...

The 922 is the first line. It sounds like you are still authorized for the guide. I assume you also have a good quality reading on G1 transponder 3. It seems like with the 922 you need at least a 30. One other thing you might try is move your dish to G1 3. Then hit the guide button...

Jim are you sure you are still authorized for the guide? You can check on your receiver in the diagnostics screen. Do options 6-0-5. Diagnostics screen A should be the first thing that comes up. On the forth line down on the far right is the guide authorization. If it is a 1 you are...

I don't believe the DSR-406 can be used with a universal LNBF. It is a Motorola DCII receiver and I believe it will only support the 10750 L.O. on Ku. T-man will need to verify this though.

The Fortec Star LNBF you are using is probably a universal model with a 9750/10600 L.O. For the DSR-406 you will need to use a standard LNBF with an L.O. of 10750. The forum won't let me post a link yet but if you do a google search for florida knowledge network dsr-406 you will find a link to...

As far as I know it has been like that since it has been launched. -26 offset is correct. According to my location on a fixed dish my normal skew for that location is about 17 figuring in the offset my skew should be around a -10. I just fine tuned the skew for max quality. Give it a...

Iceberg part of your problem getting AMC1 Ku maybe the fact that the polarization on the Ku side is offset about 26 degrees from the other sats. You will need to rotate your LNBF to get the best signal or add another to your dish for AMC1. I added a second LNBF for AMC 1 off of my main LNBF...