Search results for query: *

  1. S

    Any Recommendation on C-Band LNB on 36 inch Dish?

    Hi all, going through some ot the FAQ#s in FTA i found that it seems to be possible to receive C-Band FTA also with a 90cm Dish. (detailed equipment please see below). Does anyone have a recommendation on a C-Band LNB, that would fit on a regular 36 inch dish? If yes please provide a...
  2. S

    pansat 3500 s with motor - receive no signal quality at all

    Sorry for the confusion, i am aiming at IA5 at 97 W. But i really can only get a few of the many channels, e.g. some russian and turkish channels. There seems to be a problem, that the TP Scan doesn't find channels on all TPs that it goes through. [seems that not all TPs have a signal...
  3. S

    pansat 3500 s with motor - receive no signal quality at all

    Correction -- AMC 15 at 105W (i am sure that it is AMC 15 as it has one channel that broadcast a screen saying it is AMC -2. should be AMC 15 at 105W (i am sure that it is AMC 15 as it has one channel that broadcast a screen saying it is AMC -15 (message similar to "you are pointing...
  4. S

    pansat 3500 s with motor - receive no signal quality at all

    Hi all, here some news: I finally go the dish, receiver and motor working (kind of). First, i replaced the whole mounting - i found that the original 3 pod that came with the fortec dish and that i had mounted on a wooden palette was not strong enough. Thus i poured a pole into cement...
  5. S

    pansat 3500 s with motor - receive no signal quality at all

    Just finished redoing everything. I am now sure that the dish points to "true south" and that the cable and motor are ok. After testing quite a lot and never getting any signal quality i tried to test the lnb - thus i tired whether the signal level would change when i put something in...
  6. S

    pansat 3500 s with motor - receive no signal quality at all

    All, i removed the dish motor and hooked the receiver directly up to the dish. I also set the receiver back to the default setting. Then i doublechecked, that the direction of the dish was directly to south. Then i put the dish to 44.4 degree elevation and turned the dish slowly to...
  7. S

    pansat 3500 s with motor - receive no signal quality at all

    ok, i'll try. Another thing i noticed, is that in the quality screen the pansat 3500S shows a button "unlock". The manual doesn't describe what that means. Is there any way in the pansat 3500 to "unlock" (enable?) a satellite? Maybe thats the problem? And another thing: was does...
  8. S

    pansat 3500 s with motor - receive no signal quality at all

    Hi, i have set up my satellite system yesterday and don#t even receive 10% of signal quality neither for the "most south" nor for one of other satellites that i try. Please note that motor moves as expected, thus hookup from receiver to motor seems ok (INPUT of receiver hooked up to...
  9. S

    PANSAT 3500 S hookup to motor, use of dual LNBs question

    Pete, thanks a lot for this quick turnaround. For your info, i had emailed 2 dealers to get this information and didn't get any answer back within 3 days! Now i can try to install my system over the weekend ...
  10. S

    PANSAT 3500 S hookup to motor, use of dual LNBs question

    Thanks for the quick reply. When you say "one cable" --- which output/plug is this on the Pansat 3500S? The Ground/Rectangle one or the one which is called "INPUT" (the RG6 with a F connector)?
  11. S

    PANSAT 3500 S hookup to motor, use of dual LNBs question

    Equipment: 1 x Pansat 3500S Complete System Coax Cable 100ft Black Motor Pansat PM 900S Dish 36 Inch LNBF Universal Single From the documentation it is not clear, how the Pansat 3500 S receiver shall be hooked up to the motor. Do i have to use 2 cables a) one from the...
Top
Back