Search results for query: *

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
  1. H

    Primestar and other dishes for sale.

    Ok. Keep me posted. Thanks!
  2. H

    Primestar and other dishes for sale.

    I think I have a corotor. I'll have to check. I started taking the primestar dishes apart today so they won't take up so much room if I have to keep them. Some of the dishes are brand new and never have been put together. I have some Dishnet dishes too but I think they'll go in the scrap metal...
  3. H

    Primestar and other dishes for sale.

    Yes I really don't want to trash them. They really need a good home!
  4. H

    Primestar and other dishes for sale.

    I have 100+ primestar dishes I would like to sell. Also a few C-band dishes and odds and ends. Trying to clean out garage so would rather sell as one lot. Located in central Nebraska. Make offer. Thanks, Rick.
  5. H

    lost audio on RFD tv AMC1@103

    Thanks for the reply. I've been looking too. Was hoping somebody had an answer. Maybe nobody is having any success.
  6. H

    CRN on T7?

    Great! Thanks for the reply.
  7. H

    CRN on T7?

    Will CRN still be receivable on T7 after the alternate upgrade method? Thanks
  8. H

    lost audio on RFD tv AMC1@103

    Is anyone successfully getting the audio on RFD with an AC3 decoder. Just curious before I scrounge one up. Thanks!
  9. H

    lost audio on RFD tv AMC1@103

    Thanks. Did that just happen lately?
  10. H

    lost audio on RFD tv AMC1@103

    I don't have any audio here either with a Traxis 4550. When I bring up the "info" display with my remote it says "No Audio" under the Audio PID. I edited the channel and programmed 256 for the audio PID and I still don't have any audio and the 256 doesn't show up. Are they only broadcasting AC3...
  11. H

    Group Buy: GEOSATpro C2 LNBF $13.00!!!

    Put me down for 3. Thanks
  12. H

    Pansat 3500 Power Supply Schematic?

    I picked up a dead 3500 on ebay recently, turns out it's the power supply. The fuse is ok. I don't have any experience with switching power supplies so a schematic would be helpful. If you have a schematic or even a power supply let me know. Thanks.
  13. H

    Question about Satwork ST 3618

    Thanks Pete, the L.O. was the problem. I was sure I had changed it but apparently not! She's looking good now. I also have two 3618's but have just used them on Ku. They are simple and easy to use for blind scanning without a lot of hassle. Thanks again. Rick
  14. H

    Question about Satwork ST 3618

    Is it normal for C-band transponders to show up as Ku frequencies with the Satwork 3618? I did a blind scan on G-16. It found the channels on TP 3950 but the info screen says the TP frequency is 11949. Thanks.
  15. H

    What satellite is this?

    I'm in Nebraska. I don't see it listed by Lyngsat on AMC 8. Thanks for the quick response.
  16. H

    What satellite is this?

    I was looking for AMC 7 @ 137 degrees west with my 7.5 foot BUD and did some blind scanning and came across a radio channel on a freq of 4035 Vertical and SR of 2893. It scanned into my Pansat 3500 as "Radio 501". It's been playing Styx music for the time I listened to it. I couldn't find a...
  17. H

    Outdoor Channel?

    It's been a couple of months and yes I'm referring to digital FTA. I'm still not receiving it this morning. I'm getting a 60% quality on the Showtime horizontal preview channel but zero on the Outdoor channels. I double checked about everything but I guess I better recheck again. Thanks.
  18. H

    Outdoor Channel?

    Is the Outdoor Channel on G10R C-Band gone? It's been a while since I tuned it in but today when I went there I couldn't find it. Thanks.
  19. H

    Motor Poll and question...

    I would like to know where Sikma got his diseqc actuator. I have several P* dishes and would like to motorize one of them. I've been thinking about putting a polar mount on one or modify the mount as some have done for an HH. I'm also using a 7.5' Unimesh with a 24" actuator for my 4DTV and have...
  20. H

    Need help tuning in Fox video on G10R

    Thanks Iceberg.
  21. H

    Need help tuning in Fox video on G10R

    The Fox channel on 12114 has never had any audio or video for me. My Pansat 3500 blind scanned it in ok and the quality is 60%. I checked Lyngsat for the correct Audio and Video PID's and adjusted them accordingly, the Pansat was incorrect. Still didn't help. I finally found the audio at 36...
  22. H

    DSR922, possible to rename sats?

    I bought a used 922 and been using it since last Friday. I got some digital programming from NPS. When I go to options, 6, 5, systems status on line H I have 000000EA. Is this my firmware version? If so do I need to update it or will it happen automaticly? Thanks.
  23. H

    Buying used 4DTV gear ??

    Thanks for the link. Boy that gal on the phone wasn't very informed. Their webpage isn't very up to date either. I've been checking there all the time for their current deal and I guess I missed it. My ebay deal doesn't look that great anymore. That's the way it goes sometimes!
  24. H

    Buying used 4DTV gear ??

    I just called NPS and was quoted $501.96 which includes shipping and 3 months of some programming.
  25. H

    Buying used 4DTV gear ??

    I just checked NPS webpage and it still looks like $399 for a 922 unless I'm missing something. I bought a 922 on ebay yesterday. I didn't investigate it very much so I hope it works.
Top
Back