Search results for query: *

I've got to completely agree with this and add to it. I buy salvage TVs for parts. Some of these have been tossed around, put in piles, damaged in every way imaginable. Despite all of this, I find that unless the plasma panel has been shattered, I can typically find the bad part, replace, and...

The other issue with using a customers router to run a Joey wirelessly is you clog up their home network and many older 'G' routers can't even handle an HD stream. I'm running a Joey wirelessly in my son's room with one of Dish's USB adapters and had to upgrade my wireless router to keep if...

Does the receiver have a smartcard in the card slot or is it internal? If it's got a card, pull the card out, clean the contacts, and re-insert. If it's internal then the receiver is probably going to need to be replaced due to a bad connection with the smart card inside. This would be my...

This could also just be coincidence that it happened after an update and may actually be a failing hard drive. Just a thought.

I was curious as to how long it took people to get the ipad after the 3rd referral? Anyone that's received one want to chime in? My 3rd referral will be getting installed on Saturday. Thanks in advance!

Pull the card out, wipe the contacts, and re-insert. It sounds to me like the receiver is reading the old internal chip in the receiver instead of the smart card.

Agreed. Looks like a horrible job. And why they would wrap the cable around the mast like that is beyond me as well.

If you have a clear view farther to the west using your current dish location I'd go with western arc since you have the dish pointing in that direction already. If you are wide open to the southeast, I find the 1000.2 with the DPP Twin easier to aim from an install standpoint. You will also...

http://dx.com/p/hdmi-to-component-video-audio-av-cable-13188?tc=USD&gclid=COajyLf2wboCFa5r7AodwGgA5A Something like this just doesn't make sense to me. Again, digital to analog. Wouldn't it need a converter?

http://www.newegg.com/Product/Product.aspx?Item=N82E16815150223&nm_mc=KNC-GoogleAdwords&cm_mmc=KNC-GoogleAdwords-_-pla-_-Pro+Converter+%26+Scaler-_-N82E16815150223&gclid=CNnCre31wboCFdJj7AodpCoANA I see some cables elsewhere for $5-$10 but I truly don't understand how they could possibly work...

Maybe I'm thinking wrong here and I've never used one but seems that an HDMI to component connection would be more complicate than a simple cable. You're going from digital to analog.

I've been hearing from customers daily on this here. Wish someone would come to terms and end the saga. This is the 2nd time in 3 months everyone has been without a channel here (We were involved in the Raycom fiasco this summer). Anyway, it's making everything thing long and hard about...

Yep, seems this is becoming common on internet connected receivers. I got a call a couple months ago from them because I was frequently losing signal for two days. I told them we had experienced some bad storms and it was simply heavy rain and not an issue. Also explained that I was an...

When you say 'twin' on the 2nd dish do you actually mean twin or do you mean dual LNB. Some pictures would be extremely helpful for everyone to give you a hand. What you need is a DP dual or single LNB on the 2nd dish you have and then feed that into the DPP twin on the 1st dish. Set the skew...

Personally as an installer I've had better luck connecting only one receiver to the internet and using the bridging feature on the Hopper to connect everything else over the Moca. Ones that I used a Hic on or if I connected multiple receivers to the same network via various methods required...

Getting the HD receiver won't do any good if he's tied to their dish setup. If they aren't providing the QAM signal from the HD transponders then he cannot receive them. He'd have to have his own dish set up to accomplish it and I'm guessing the place has a restriction on dishes if they have...

I know its not an approved method but when I use a larger pole like the OP had in the picture, I cut off a straight piece of the smaller mast about a foot long, stick it into the larger mast, and run a minimum of two large bolts with nuts completely through the entire thing perpendicular to each...

Agreed. And unless the shop is some outrageous distance from the house I believe a Joey can work there via coax. Especially if you use solid copper core. If you pre-run the wire out there and bury it yourself there should be zero additional cost with that.

Where about are you located DeadEnd? I was thinking South Carolina based on your info you have posted. This is being made way more complicated to you than it needs to be. I just did a very similar configuration to yours for a friend with very little extra cost.

To me personally as an installer, it seems like you'd want 1-2 Hoppers at your house, possibly a Joey in the Shop, and a 211k for your traveling. How far exactly is the shop from the house? The Joey doesn't have nearly the constraints on wire length that the Hopper does. I've successfully run...

I think it's strange that someone can have such a difficult time requesting exactly what type of equipment they want. As a person that works directly for a retailer, I can go pick up whatever model receiver the customer requests whether it be a new install or upgrade and have it to them the...

I'd just make sure the jumper is RG6. There is a very slim chance you'll have a problem as long as you stick to that. Especially on a short piece. Get one with threaded connectors too and not the quick push on type.

This is not necessarily true. You can have signal loss on local channels resulting in a re-direct to this message. It can in some cases be an individual issue with a customer. I've actually thought that the re-direct is a dumb idea. It leads a customer to believe that the problem is going to...

Not trying to start an argument since that would certainly be nice, however the machine would need to be recording every channel to make this happen.

If you only use the 211z in the motor home then you shouldn't need to change what you are doing at all. As navychop stated you would need to run a check switch if you move from one dish to the other but that would be the only issue.