Search results for query: *

actually, I'm in-house. I used to be a sub. When I was a sub, I saw alot of sh!tty jobs that is done by in-house too. Probably most in-house do a good job,but the bad ones cause the most TC or repeat calls. The jobs that are done right, you never see because it never need fixing. It holds...

I resent this statement! :(

looks like a handshake issue, try a different brand hdmi or just use component

if you can , run the coxial from dish to electric meter, ground it on the meter( within 20 feet, shorter the better), run the coxial back from ground block to the dish. or ground to the cold water pipe on the water heater or relocate dish

Boy, there sure alot of Dishstore.net employees in this thread.

hope that won't become a TC,

clueless csr, hang up and try another csr.

yeap, it is circular. I though it was linear too, since it uses a larger reflector. Since it uses the lower frequency it needs the larger reflector.

hmmm.... hooking up 110 119 118 129 to a 4x1 DiSEqc and a NFusion Box , hmmm, something wrong with this picture. http://www.satelliteguys.us/installer-zone/186280-dish500.html

negative, 118 (1F port) and 119(2D port) are on seperate ports, and 110 is on the right bracket (if face toward lnb) and the 129 is on the left bracket. Since you also asking about NFusion FTA boxes on the other thread, I think you are referring to non-OEM Dishnetwork lnb where the single port...

all of them are circular polarity. 110, 119, 129 are cirular polarity at 11250 frequency 118 is a cirular polarity at 10750 121, its Linear at 10750

I think they test you on differential equation.

I feel sorry for the customer because of the sale representative making a sale, but I can relate to the tech. I think all experience techs can relate to what the tech is going through. This is too common for Directv and Dish Network sales partners to mess up, miss inform, and make outrages...

poor, poor installer.

No, I wasn't bragging or proud of it. This just bring up the time I was working with those retailers. It seems to be prevalent when I see this thread. I didn't think much back then, I was paying my bills and making my customers happy and the owner happy.

DNS have a meeting with all the installer about Account flipping. If employees suspect an account flipping, they should call a 1-800 number to turn them in. Then Dish network probably will audit the account. When I did some fulfillment work for a retailer/Dish network sub, the owner flip...

I think you get that free if you have 118.

The left most port for the twin, twin pro, twin plus, quad, quad pro is designated to 119 unless use put it on DiseqC LNB B, The second port on the lnb is designated to 110. If you using a dual lnb to point and still can lock in to 119, then there is something wrong with you meter or you...

There is also a switch on your birdog that can switch from 119 to 110 with out putting it on the 110 port. Just put hook up port one for the 119 and peak the signal. Then if you want to check for 110, press down arrow and hold it until the DiseqC menu comes up. Then select DiseqC LNB B and...

I guess you forgot to read the user manual. If you are using a 500 plus, it will sometimes say overcurrent because the DISH pro plus uses too much power (24v) and the birdog is not intended for the use of DISH Pro Plus LNBs. What you do is use a dual dish pro LNB on the 119 side and aim it...

nope, I don't see in his website.

I know the DPP33 switch just came out but I can't seem to find a place that sells it.

Just remember 129 have a lower signal than 119, if you peak it. If your birdog is set to 129 it will say found 129 even if you point at 119 and vise versa.

I think there might be interference. There is a connector call 15db attenuator (comes with the receiver)that blocks the interference. Have you try putting it on?

Where is his pool? I'll get a mop.