Search results for query: *

Just installed my FTA MOTOR DISH!!!!!! and it works on the 22khz side!!! anyone have a satellite list for the Sonicview Elite 360? I am missing some satellites like 113 Satmex 6....

Hmmm...good to know...what about on the 22khz side? Will it still work?

Will a 22khz Encoda Switch work before the motor? Will I still be able to move the motor from the receiver? If not, how about I move the motor into the 0khz side? I don't want to run an extra coax cable into the house....I have too many cables :D Also, how about after the motor? Can I run...

I C&P from dishpointer.com :)

Thanks for the helps guys....I will try this later and let you know how it goes...

I just bought a HH90 motor with a Fortec 36" and an Invacom QPH-031....I was wondering what my true south satellite would be...... Latitude: 34.0989° Longitude: -118.1650° Motor Latitude: 34.1° Declination Angle: 5.5° Dish Elevation: 39° Elevation: 50.4° Azimuth (true): 180.0° Azimuth...

How long are your screws? I bought 8/32 - 2.5" Length screws......i couldn't get the 95 LNB to be tight...maybe its possible to use 2 of those Eagle Linear LNBS? since they are smaller in in thickness...

how did you get the 95 LNB to bolt down? I tried doing this earlier....and I would not get a signal unless it is bolted down tight....

DTV International Dish Is it possible to switch out the 101 Circular LNB to a Linear LNB to receive AMC 4 101 programming? Thanks

Is it possible to replace the 95 LNB on the DTV Dish with a Dual Linear LNB? Something like this Link ? One port will go to the 6x8 Zinwell switch for DTV and the other will go to a FTA box? is this possible?

Yes, I am subscribed to DTV......so this isn't possible?

I have a DirecTV Slimline AU9 with the DirecTV 36" International connected with a zinwell 6x8 switch.....I want to use a FTA receiver to also get FTA channels from 95.....

I have no idea what you're talking about :confused: got any diagrams? Pics?

Right on :).....anyways....I did have it on Universal, and it was 9750/10600.........you're right...this thing is a POS....I do have a SV8000 as well.....and the thing works a lot better.

Is it possible to use my DirecTV 36" International Dish for FTA receiver as well as my DTV receiver at the same time? Like is there some sort of splitter that would let me use both types of receiver with 1 LNB? I know that FTA boxes uses MPEG2 DVB and DirecTV uses DSS..... Is this possible...

Yes you are right....that was a typo...

Hmmmm....that might just be the culprit.......Make sense too...since I was only able to get 1 transponder from satellite 101.....I'll try changing the skew the other direction tomorrow.....and let you know if I have success... Thanks for your help Iceberg!!

Also, it says a Skew of -28....How do I know which way I skew it? Standing in front of the dish...which way do I turn the LNB? Right now its Counter clockwise

Yes, I skewed the LNB. My elevation when I picked up the 101 was actually 53.......So I guess I will try to lower it to like 50 and move it 1/16" East....

I meant the signal from my Accutrac 22....not my FTA box.

I tried moving it to the East a little bit, but the signal on the meter will just start going down....maybe the signal overlaps? If its Satellite 101, then how come it says on the box that its on AMC 103W? Is 101 the same elevation as 97? Thanks for your help.

Hi, I have been trying to get this satellite for couple of channels that I watch and I am unable to do so. Here is my setup Samsonic AC1075 Linear LNB Fortec 31" Sonicview 360 Elite My Zip Code: 91030 Elevation: 44.3 Skew: -28.1 Azimuth: 132.5 (mag) I am using a Acutrac 22 Pro Meter. Here...