Search results for query: *

I have a Captive Works 4000HD and yes it does not pickup the DVB-S2 but, it can. Captive works already has two DVB-S2 tuners that will work in their unit. They are: Technotrend S2-1600 and Geniatech Digistar-2HD, they can be installed and the software is already in the unit. What is nice about...

My modified dish mount Here are the pics I promised.

I am using a CW700S and a Channel Master 90M dish with a linear low noise lnbf. I have so far locked onto 83° and 87°W but, I can't find 85° W? Is it not on today?

Test channel om 85° W? Can someone tell me if they can get the test channel on AMC 16 @ 85° W? I have been trying to get a lock on this satellite for my true South. The freq. is 12184 H 3978 3/4 PID 1623. I hope to get my dish locked down before a storm hits here.

The channel on 12182 to test on, is that H or Vert. on AMC 16@ 85° W?

turbosat, I am in Somerset, KY. I think Cave City is two hours away from me.

OSU1991, I try and do that in the next couple of days. what I did was modify a Direct Tv dish, a old one that has a lot thicker and stronger steel. I took that mount off the dish and cut the lnbf holder off. I used two thick pieces of aluminum strips to mount to the dish and the Direct Tv mount...

I'm setting up a 90M Channel Master Dish with a SG9120-B motor. I redesigned and made my own mount on the back of my dish. My location is Lat - 37.1° N Long. 84.6° W. If I figure it right, my True South should be pointing in the direction of satellite AMC 16 ku band at 85° W. Is this correct...

I just found one of my receivers I bought new 12 yrs ago. I wonder if it would be of any use, it is like new condition. It is a Uniden President PS-650XL, I used it to pick up C and Ku bands at a fitness center I owned. I guess it still works, I have had it boxed up and in storage for 10 yrs and...

Here is what CaptiveWorks FAQ page says. What are the types of DVBS-2 tuners supported by the CW-LMC software? There are currently two DVBS-2 tuners that have driver support with the 1.0.1.17 software release. Technotrend S2-1600 Geniatech Digistar-2HD So am I...

Hey Mike, What about installing one of the following DVB-S@ tuners that Captive Works suggests. They say these will work with the software of the receiver. TT-budget® S2-1600 or this one TV Products Expert Will these not get the wild feeds? Thanks for the reply.

I have a CaptiveWorks 4000HD and a CW700. I need to know if the 700 with blind scan will receive the wildfeed signals? I know I need to install a card into the 4000HD for it to work with DVBS-2. I have a 90M Channel master dish with a 0.2db universal LNBF and will have the motor for it tomorrow...

It looks like it can when you install a card in the receiver. Here is one of the two they recommend for the CW 4000HD receiver. http://www.geniatech.com/pa/digistar2.asp the other one is a Technotrend S2-1600. I am leaning more to the Digistar 2HD.

I made my own mount today from a picture I found. Now after reading some info. on motor setup it says to set a dish elevation, I didn't make an adjustment for that so I will need to add it I guess. I downloaded a picture and saved it but, lost the URL. I will try and find it and post it on here...

I have several lnbfs that I could try, one is a linear universal 0.2db. I went ahead and bought the QPH-31 for $45. I think it might be easier to find satellites if I have both the circular and linear on the same lnb when doing the setup. I hope to get this operational next Wednesday. I think I...

Hello everyone, hope you had a great day. I have a Channel Master dish mold 90M-1 and I am getting ready to order a motor for it. I am wanting to get as many channels as possible on this dish, so would a INVACOM QPH-31 be the best LNBF for this setup? I also looked into the mini bud setup but...