Search results for query: *

It depends on the model of LNBF. Many European users have found that Invacom Quad Universal LNBFs outperform Invacom single LNBFs on weak signals.

Astrotel in Essex. Astrotel Europe eyeinthesky will ship from US and also stock offset C-band feedhorns. Eye In The Sky

Any chance that we could see some pics of the inner workings of the boxes from either side of the Atlantic - might be useful to see if the lack of 4:2:2 is software or hardware related?

Can it blindscan for both DVB-S and DVB-S2 signals?

The Fortec Passion is now selling for £149 ($300) in the UK. Still no sign of a release of a 4:2:2 or blindscan enabled firmware from Fortecstar however. h**p://www.maplin.co.uk/Module.aspx?ModuleNo=99265&TabID=1&source=1&doy=11m7

Which firmware version is installed in your test unit? These receivers have recently gone on sale in Europe, but so far users have been unable to clear 4:2:2 transmissions.

Thanks to all above for replies! I have been able to get some more info. LNB input ranges are 18.3 - 18.8 GHz & 19.7 - 20.2 GHz. LNB output ranges are 250 - 750 MHz & 1650 - 2050 MHz Circular polarisation. The lower band requires a B-band to L-band upconverter to work with a standard...

Can someone tell me what the frequency range of a DirectTV Ka band LNBF is and what the Local Oscillator frequency is? I was considering importing a DirectTV LNBF from the US to Europe, just to see if there are any signals being broadcast here in the Ka band.

You can't put two committed (Diseqc 1.0) switches in series. Instead you must put an uncommitted (Diseqc 1.1) switch nearest the receiver and a committed (Diseqc 1.0) switch nearest to the LNBFs. http://www.satlex.de/en/1participant-type_conf_1p_8s.html "How do the different types of...

The 04/05 issue is also available: http://www.tele-satellite.com/magazine/TELE-satellite-0605-eng.pdf

http://search-desc.ebay.co.uk/netsystem_W0QQbsZSearchQQcatrefZC6QQcoactionZcompareQQcoentrypageZsearchQQcopagenumZ1QQflocZ1QQfposZPostcodeQQfromZR10QQfsooZ1QQfsopZ1QQfstypeZ1QQftrtZ1QQftrvZ1QQftsZ2QQga10244Z10425QQsacatZQ2d1QQsadisZ200QQsargnZQ2d1QQsaslcZ3QQsbrftogZ1QQsofocusZbs...

I don't use the SS2 to drive a Diseqc motor. I use a 36V linear actuator setup instead. As jerryt says, Technisat don't release proper Diseqc 1.2 drivers for the SS2 because you can potentially burn out the card if the load is too much. From what I've read though, quite a lot of people are...

The SS2 r2.3 is the original version of the Skystar 2 card. The newer versions are 2.6 (b or c or d etc...). They have a smaller profile than r2.3 and the heat problem is less of an issue. That being said I've never noticed much of a heat problem with the r2.3 card, but I do know that some...

Just wondering if anyone with a Twinhan Starbox USB 2.0 box had managed to view 4:2:2 transmissions with it? If yes, what software did you use (ProgDVB & elecard?)?? TIA!