Search results for query: *

Contest I would chose the VisionSat because of the PVR and blindscan capability. Sounds like a wonderful new toy:).

Question Since I have the coax running to the BEC and then to the 450i (as mover), do I delete channels from both receivers or just the Digital receiver?

Almost back in business! As stated I have the system back and running, however I still cannot get T5 to pick up a Ku signal, except sometimes a weak one (signal 60, quality 40) and then it's gone again. It has the same dish setup as AMC4 (I get KUIL with 60 signal and 98 quality. G3 is the...

Kevin, Your question is best answered on the FTA PC DVB Forum.

F/u That is exactly what I did with no change. I could not pick up any signal. I did the same with KUIL on AMC4 and was able to lock it in with good signal and quality. Help! I was able to get a signal, albeit weak (45 signal, 50 quality), for a few seconds. Then it was gone again. I had...

How can I change the skew for the other satellites? My 450i does not show skew in the menu and on the BEC it is on 0. I bumped it to both sides for both satellites, with no success. When I go back to the 450i screen to check I am on another satellite.

Ku As I said, I'm back up and running, however there is a glitch. I am able to get all of my C Band Digitals, but the only Ku Digital I can get is KUIL on W4. The Ku on G10 and W1 will not come in no matter what I try. The settings are right because they are the same as for KUIL. I checked...

Back in business Well the new BSC 621-2 LNBF is installed and I am back in business. All I have to do is fine tune the system again. I have gotten the main channels(G4 PR MUX, AMC 1 DWTV, AMC4 KUIL and G5 Analog) C and Ku back, but I am having problems with G10. Had the Ku side up and then...

My installation guy just tried to get it to work and when it didn't he took it off and said that was bad. I called my supplier and he sent another one. I will send the 1st one back to DMSI to see if I can get a replacement for that one, if it really is bad. That way I will have a spare. I...

f/u Looks like the LNBF went totally out. No luck with any changes. New BSC 621-2 will arrive this PM. I will keep my fingers crossed that it makes everything work. If not I will have to look for other problems (BEC 6600+ or Motorola 450i). Will keep everyone up to date as things progress.:(

More Problems My DC Block will be in tomorrow, however in the meanwhile I lost the signal I had. When I turned on the system last night I could not get anything on any sat. The night before G4 PR MUX was clear(10% Strength, 98% Quality), G5 TNT and TBS(40% signal strength) were there, but...

Ice will a Skywalker Signature DC Block work?

Exactly what DC blocker would I need and where can I get one? The 450i does handle as many Satelllites as I need. There is only one other I plan to try and that is PAS9 at 58%.

Yeah, the coax from LNBF goes to the BEC and then one to the 450i and then to the VCR. I always cut the receivers off when working with the LNBF. The one individul in my area who does some work on C-Band and Ku is coming by next week if it isn't raining. If he can't get it up, I would take...

Bsc 621-2 F/u My set up is what the people at DMSI told me. The coax is run to the BEC 6600+ and the M1/M2 are run to the 450i for moving. Orignally I was able to get all three, however the analog was a bit weak and the Ku needed a few bumps to get in line. The LNBF appeared to switch...

Bsc 621-2 F/u Yes I set it on G4 16 or 17 and the picture will not clear up no matter which way I bump the dish. This is the analog side. The Digital side Carribean MUX on the same sat is clear as a bell, only with just 10% strength and 95-98% quality. It was set up with a one Coax system...

Bsc 621-2 F/u My reception was gone when he installed the 621-2. A storm had knocked out the BSC-421 C-Band LNBF that as there. Before that storm I had good reception overall. I went with the 621 so I could get Ku for KUIL in Beaumont, TX and not miss my beloved Cowboys. There is a surge...

Bsc 621-2 F/u No I cannot do the adjustment myself. My hands and eyes are not steady enough. When I say fine tune, I mean I went to the menu on the BEC and put in the coordinates, then using my 450i I moved the dish until I got yellow lines. I could do that with W1 as well, but now it does...

I had my LNBF installed several months ago (Nov '06) and early on had some problems with analog reception. My subscription channels on G5 were very weak and hazy. Occasionally some of them (TBS & TNT) would clear up, but most would not. I had to fine tune the Ku side on the BEC 6600+ and was...

We were there in December and you can get most English speaking channels, including movies, sports and Prime time shows on DirectTV or Cable!

Analog Receiver I have one analog (Motorola 450i) active.

Labgate, When I try to access your diagrams I am asked to login. Then I cannot access the rest of your site either. What happened?

Did you ask Pansat USA? They responded to me immediately when I asked about my problem. Hope you get yours working.

That's all they told me. I had looked in the manual, but I guess I missed that. Sometimes and old "Phart" like me can't see what he reads

Today I attempted to turn my Pansat 3500S on and it would not respond to the remote. It appears to be stuck in TV Mode. What can I do to get it out of that mode and responding to the reciever? Help! Pansat USA answered my question immediately.