Search results for query: *

Sorry, Brian, I have a go-back on this one. I scanned some feeds on 103W yesterday. Didn't notice the parameters at the time, but when I looked at them later, the feeds were gone and the info screen showed (HBCD). I've reconfirmed that now that I'm back home. I'm doing a detailed blind scan...

Yep, can't argue with that, Brian. Just something I noticed different from other receivers I've played with. Spent the afternoon looking at a few transponders with my new microHD, my AZBox Premium HD, and my old standby Coolsat 4000 Pro. Used a Primestar 84e on an SG2100 motor. Used the...

Some of the intermittent news feed on AMC1 (103W) are HBCD and will lock for me. _ Neil

One other thing I noticed is the Signal Level is always 90 if you have a signal, 45 if there's no signal. Have never seen anything else. In the full screen meter, the left most bar is the newest sample. __ Neil

So far, microHD quality meter seems to be on par with that of my AZBox Premium. Can't remember my CS4K anymore and have no experience with the Openbox receivers. __ Neil

Maybe a dumb question (is there a FAQ anywhere?), but how do I enter a space (when editing channel names, for instance)? _ Neil

Brian, Regarding update via satellite, will the receiver display the changes included in the update (i.e. the release notes) so we can decide if we want to apply the update? Sounds like the manual option will store the update in the receiver for later installation? Can such a stored update be...

Not sure this is pertinent to what you're troubleshooting, but in my case if I had a USB device in both ports, my Premium would always detect the device (memory stick) in the front panel port first and call it USB1. I had to remove it and reboot to force the AZBOX to identify the rear port...

Just want to report that 5300 is still working fine...for me. I have a Premium HD, not Plus, loaded the 50.1 MB sized (52,633,656 bytes) 5300 patch over firmware 5020. All S2 channels I receive are working (OETA and LPB on 125W and NBC on 103W), recording and playback of those HD channels is...

5300 seems to have fixed the playback of recordings made of NBC on 103 Ku. 5020 would play them back choppy. Don't use FTP or telnet, so can't comment on those features. Don't see any other downsides. Oh yeah, it did set the menus to French, but was easily returned to English. _ Neil

Have my wireless working again with 5020. Had to force it to fail a wired connection when there wasn't one before it would present the setup parameters for a wireless connection. Have noticed that since upgrading from 2238 I can't get a good recording of NBC HD East. Used to record okay, but...

Thanks for the responses to my ressurection of this thread. Turns out I had 5209 loaded, but now I've loaded 5020 with no changes in my problems. Haven't used it enough to see if the HDMI problem is still there, though. If I could get it to connect to my home network wirelessly like it did...

Recently upgraded my Premium HD from original factory firmware 2238 to almost-latest 5020. Have since noticed clock setting is not retained when rebooting, sometimes does not show a picture after waking up from standby (HDMI handshaking issue, I think), and will not connect to my wireless...

I've found you can turn the receiver on (and back off) in the middle of a reserved recording to view the program being recorded without interfering with the recording. Just don't try to change channels. __ Neil

How would one set such a chapter mark? __ Neil