Search results for query: *

FNX = First Nations Experience, a channel for indigenous issues...... Sent from my Pixel 3a using Tapatalk

I'm seeing better performance with the C138 not because it's better than a C1 but I did a better job installing and peaking the signal. I was a little naive when I installed the C1PLL and although it was working I'm picking up more stations with the 138 because it's better aligned. I don't...

If I was updating an older system I would go for the C138. I don't know how to measure 5G interference but the 138 seems to be good insurance to not have the issue in the first place.

Hi all, my C band system was working fine until a couple weeks ago, when I started seeing major interference on many C band satellites. I attributed this issue to the recent activation of 5G phone service. The problem appeared as pixelation on many satellites. Sometimes minor, and sometimes...

Yep it looks like it moved to Ku band. Try SES-3 103W at 12080 H 29992. I like DW at watch it often. Sent from my Pixel 3a using Tapatalk

Hi all is something wrong with CTV on Anik F1? The audio is out of sync and the video is moving in slow motion. The signal is loud at 15 dB on my Edision mio+ 4k. Thanks for any info Rgds, Al Rovner Sent from my Pixel 3a using the SatelliteGuys app!

I'm trying to remember, I think it was .37 it's somewhere on the spec sheet. I'm using a Titanium C1-PLL with no issues. Sent from my moto x4 using the SatelliteGuys app!

Hi John the performance is ok but I don't pick up some signals listed in the forum. Could be a 10' dish is needed, could be I'm not fully aligned. I don't know your location but if you need to mount your dish mover arm to the left side of the dish you may have additional work needed. When I...

Hey I recognize those boxes, that's my dish. Really the only gripe I had was with the mounting pole, it was a thin material, and the 3 legs didn't lay flat. I used my own pole. The dish has been working fine although I'm testing a 10' replacement. If you have any questions let me know. I...

Hi all what's your opinion about using a Sonotube for a C Band pole? Good idea or not? Thanks, Al, K7AR Sent from my Lenovo TB-8504F using the SatelliteGuys app!

I spoke with Brian and coordinated a pickup time. If anything changes I'll post an update here. Al Rovner, K7AR Sent from my Lenovo TB-8504F using the SatelliteGuys app!

Hi Brian, I'll take the whole package if still available. I'll call you on the phone later today. Al Rovner, K7AR Sent from my moto x4 using the SatelliteGuys app!

That's the same dish I have, although I have the 8' version. It's not flimsy, it works fine, been in use for over a year with no issues. Sent from my moto x4 using the SatelliteGuys app!

The feeds are present where they should be, but the west coast feeds are weak at my location, about 10-15% quality. Ironic since I'm on the west coast. Good luck..... Sent from my moto x4 using the SatelliteGuys app!

Hello DL1OM nice to see another ham on here. 73, Al, K7AR

I have an ASC1 and can highly recommend it. You can store your position settings in a CSV file and also name each satellite. It's a good choice.

You didn't mention specific equipment you're using, but in general run a short coax jumper from your receiver to REC connector, and connect the coax from your LNBF to the LNB connector. Good luck. ...

Canal Once is on the Eutelsat B bird at 115 W 4109H. Coming in strong in Portland, OR but this satellite has an funny footprint that leaves out the Eastern US.

Correct, the two bolts you highlighted adjust the declination offset. The bottom of the dish has a small pivot point and the two bolts adjust the pivot.

I added a few more closeup photos as requested, hope that is useful.

I will try to add more photos this afternoon, please wait a bit.....

That's a good point, the supplied mounting pole was thin walled, maybe 3-4 mm. I don't know if you can see in the photos but my neighbor welded a 4 1/2" sleeve over an existing 3 1/2" pole, and got it to within 1 degree of being plumb.

A couple more comments, I did replace the two bolts that the reflector pivots on. One of them stripped as it was tightened. That shouldn't have happened unless the bolt was cheaply made. No issues so far with the long elevation bolt. Performance wise I'm happy so far I'm receiving all sats...

I recently installed a Tek2000 C Band 8' solid dish, and thought the forum might benefit from a review. I'll divide my comments into separate categories. Cost I thought the cost was reasonable, $349 for the dish, and $130 for shipping from Toronto to Washington State. Ordering After placing...