Search results for query: *

Got this Saginaw 36in monster actuator (experienced) will use 4DTV DSR922 as positioner for my BUD-10 Saginaw cables schema... 1. power-black 2. power-red 3. not used 4. sensor-red 5. sensor-black 6. sensor-green Motor educated guess... 1= M1 2= M2 Sensor educated guess... 4= red = +5V 5=...

The KU side of my BSC621 is dead... so I remove the three screws... and piggy back an AlphaStar 1.0dB LNB barrel type ... over 10 years old ... Bottom line... it works... Since this trick works... Im looking for other game with that BSC feed horn... Remove the plastic cover on the QPH-031...

Your range is 40W-139W ... Whats your local meridian/longitude ? From July test on Hispasat 30w... 66w-30w = 36 meridian degrees on flop side From calculations... 66W horizon is 1W-139W Have someone ever reach that far ? Is it save ? Wind can be an issue... There is no snow at this...

I have an spare BUD-10 ... not mounted at this time... was considering that option... for east sats... but have some sight problems on low east elevation Thanks for your feedback... :eureka

Bud Positioner which one ? After lot of reading reviews about positioners... I have mixed feelings... need some advice... The client will be a 10-footer with 36V+36in actuator now using 4DTV DSR922 as positioner... ex-sub can not lock G1 for updates... used for free-to-air LNB is BSC621-2 C+KU...

Same dish... now looking at 61w since location is at 66w ... this bird is close to True-South... dish and base near 90 degrees... Now we can observe the plate extention mechanical advantage... just draw a line between the factory and the ring bolts... Thanks to July for this photo...

NOT my dish! ... but wana be... Iam looking to do the same thing on my BUD... but was afraid of the penalty... flopping... this guy did it... dont now if this is safe... but there is it... Look at the steel plate extention on the actuator pivot... seems to me that it is there as a mechanical...

Yes... you can use that BUD with FTA... Pansat 3500 have the hardware to control the servo motor 3-wires and the menus has option to setup skew per transponder... nice unit... For C-Band ... only thing to set is LNB frequency 5150 sat-info C-birds are already preset to this value You will...

As soon as power cord is connected... there is no response from remote and display shows this... * *. 8. 8. 8. Three 8s ... not four... sorry! VC= green Message= red SAT/TV= green Timer= green DC= green Receiver was opened an all cables revised cleaned from dust and firmly attached all...

Thanks all for your helpful hints... and links! Have two dead 18" actuators... >Von Weise >SuperJack Will repair them someday... good weekend proyect...

Tested with power cord only... no more connections... same result.... 8888

Hi there... 1st post here... DSR920 displays '8888' ... no warmup... Dead battery maybe ? Thanks for your support..