Social Feed

boomer_106

Last reply Nov 4, 2007 · posted in Free To Air (FTA) Discussion

question

I have my KU band feed coming into the house hooked to a high frequency splitter then the power port side to my analog rec. The other port runs to my DVB rec. My C band feed just runs right into the analog receiver.

So I figure setup like this the only digital feeds I will get are KU band. Somehow I've found some C band freq this way. Honest to goodness I found this game the other night.

This was verified as a C band feed by another user. I was not able to receive the network feeds on Galaxy 16. So I figure well of course not the C band lnb isn't hooked up. So I change things around and run the C lnb through the splitter to both receivers and the KU to the analog alone. Now I get feeds on Ga. 16 freq 3950 SR 12296 and the one on freq 3775 SR 3255

I'm also able to get networks from Gal 95 Freq 11661 SR 6614 and 11788 SR 29110. Those are obviously KU band frequencies.

The question is how the heck am I receiving both frequencies sometimes with just one or the other type lnb hooked up to my DVB Rec?

I need to get a diseqc so I can run them both to DVB but, I'm hoping someone can shed some light on this

6 Replies · 2186 views

Load Replies (6) Reply Legacy View

boomer_106

Nov 4, 2007

Ahh, thanks Iceberg.

I guess you have a point about the feed thing.

When I set that lnb freq thing, sometimes in the menu there is no signal on the meter when I select a certain freq. That is the reason I select one that shows strong. Perhaps I don't need to do that? Some sats with c band freq don't want to let me set it at 5150. I think I might be able to enter that freq directly though. I'll have to try it.

Is there a way I can tell what I should put it at or, do I need to change it according to the band (C/KU) that I am looking for?

Thanks for your help. You're always there when we need ya

qwert1515

Nov 4, 2007

Code:

[FONT=Fixedsys]
LNB Type             Frequency Range           Local Oscillator (LO) Frequency
------------------------------------------------------------------------------
KU Circular          (12200 MHz - 12700 MHz)   11250 MHz
KU Standard          (11700 MHz - 12200 MHz)   10750 MHz
KU Universal High    (11700 MHz - 12750 MHz)   10600 MHz
KU Universal Low     (10700 MHz - 11700 MHz)   9750  MHz
C Standard           (3400  MHz - 4200  MHz)   5150  MHz
[/FONT]

boomer_106

Nov 4, 2007

qwert1515 said:

Code:

[FONT=Fixedsys]
LNB Type             Frequency Range           Local Oscillator (LO) Frequency
------------------------------------------------------------------------------
KU Circular          (12200 MHz - 12700 MHz)   11250
KU Standard          (11700 MHz - 12200 MHz)   10750
KU Universal High    (11700 MHz - 12750 MHz)   10600
KU Universal Low     (10700 MHz - 11700 MHz)   9750
C Standard           (3400  MHz - 4200  MHz)   5150
[/FONT]

Thanks Qwert, so is it correct to assume that I should only set it 10750 if it's a KU only satellite such as AMC2? If a sat has C and KU freq I should set it at 5150? Do I understand correctly?

qwert1515

Nov 4, 2007

boomer_106 said:
Thanks Qwert, so is it correct to assume that I should only set it 10750 if it's a KU only satellite such as AMC2? If a sat has C and KU freq I should set it at 5150? Do I understand correctly?

No, if a satellite has both it is best to have two satellites on your receiver, or you have to change the LO for each band.

Example:

Galaxy 16 C LO: 5150 MHz
Galaxy 16 Ku LO: 10750 MHz

In your situation if the satellite has Ku frequencies (11700 MHz - 12200 MHz) or five digit frequencies you need to set the LO to 10750.

If it has C band frequencies (3400 MHz - 4200 MHz) or four digit frequencies you need to set the LO to 5150.

If you set the LO to one of those you can only receive one band.

boomer_106

Nov 4, 2007

qwert1515 said:
No, if a satellite has both it is best to have two satellites on your receiver, or you have to change the LO for each band.

Example:

Galaxy 16 C LO: 5150 MHz
Galaxy 16 Ku LO: 10750 MHz

In your situation if the satellite has Ku frequencies (11700 MHz - 12200 MHz) or five digit frequencies you need to set the LO to 10750.

If it has C band frequencies (3400 MHz - 4200 MHz) or four digit frequencies you need to set the LO to 5150.

If you set the LO to one of those you can only receive one band.

I'm getting the picture now. I've noticed that my DVB receiver does in some cases have the same satellite preprogrammed in twice. For example G3C and G3/C. Both were set to 10660 or something frequency wise. This explains, as Iceberg noted, why I was getting those networks on goofy frequencies. It also explains why I've had trouble finding some posted feeds. I can see I have some work to do getting all this set right. At least now I see where all the confusion came from.

I appreciate the help of everyone here. You guys are great.

View all replies (6)

dishstaller

Pub Member / Supporter Lifetime Supporter

Last reply A moment ago · posted in The Chit Chat Club

You can't even trust the cost per ounce info in grocery stores anymore

I'm surprised Walmart hasn't banned this guy from all of their stores. He has been on their CASE the past few months.

View: https://www.youtube.com/shorts/f3zr37ekgKM?feature=share

46 Replies · 423 views

Load Replies (46) Reply Legacy View

Reactions: NYDutch

Jimbo

Wednesday at 6:26 PM

telstar_1 said:
Well, the bag can't weigh that much, right? But by law food product packaging must display the actual net weight of the product, i.e., the contents of the container, so by any logic, if not law, a store's stated per-ounce cost should reflect that figure. But since there's not any law regulating shelf statements, a store can say whatever it wants without violating any rules. So I guess the answer is more consumer legislation. Or simply caveat emptor.

I would think that the Vendor/Maker of the product would have a say in it, showing the Correct weight ...
You would think it would be in the contract.

I do look at the ounces of items, but unless its way off, I don't check the math, may have to start now.

Remember when you use to get a 13.5 oz bag of Chips .... Thats a PARTY Size now.

Reactions: AZ.

TRG

Wednesday at 6:41 PM

Jimbo said:
I would think that the Vendor/Maker of the product would have a say in it, showing the Correct weight ...
You would think it would be in the contract.

I do look at the ounces of items, but unless its way off, I don't check the math, may have to start now.

Remember when you use to get a 13.5 oz bag of Chips .... Thats a PARTY Size now.

I remember when a pound of coffee was 16oz. Now its 12oz, they don't call it a pound anymore and its three times the cost of the 16oz pound.

Reactions: dishstaller, slow_poke_pete and Bobby

Jimbo

Wednesday at 7:05 PM

TRG said:
I remember when a pound of coffee was 16oz. Now its 12oz, they don't call it a pound anymore and its three times the cost of the 16oz pound.

Well, they don't call it a pound anymore ....

Ice cream is that way too, use to be a half gallon, now its 1.5 quart or some say 48 oz

Reactions: Bobby

NYDutch

Wednesday at 7:39 PM

Jimbo said:
Well, they don't call it a pound anymore ....

Ice cream is that way too, use to be a half gallon, now its 1.5 quart or some say 48 oz

We have a regional ice cream company here that advertises that their ice cream containers are still a full half gallon.

Reactions: dishdude, Jimbo, Foxbat and 2 others

Jimbo

Wednesday at 8:54 PM

NYDutch said:
We have a regional ice cream company here that advertises that their ice cream containers are still a full half gallon.

Now check and see if any of them (probably a few) are actual Ice Cream ...

Most Ice Creams are Not actual Ice Cream.
Bryers for example, call Most of thiers "Frozen Dairy Dessert"

Juan

Yesterday at 7:13 AM

dishstaller said:
Well, according to the price per ounce on that first bag of coffee he mentions, that would mean the bag weighed over 6 ounces. That bag does NOT weigh 6 ounces. According to Google, an empty bag weighs half an ounce.

You need to weigh the actual bag...a deli bag weighs less than that but a thick coffee bag is gonna weigh around an ounce...an empty tin can has some weight

NYDutch

Yesterday at 7:44 AM

Juan said:
You need to weigh the actual bag...a deli bag weighs less than that but a thick coffee bag is gonna weigh around an ounce...an empty tin can has some weight

Products sold by the ounce, pound, etc, should always be priced for the product only. Only the shipping weight should include the packaging.

Reactions: navychop, Foxbat, slow_poke_pete and 2 others

harshness

Yesterday at 9:21 AM

NYDutch said:
Products sold by the ounce, pound, etc, should always be priced for the product only.

Unless the specific product or its packaging is known at the time of weighing, estimating the tare weight for a PoS system is a tall order.

I'm pretty sure that produce bags can't get any thinner.

You certainly don't want to put unbagged produce on a belt, scale, or in a clerk's hands (gloved or not).

Jimbo

Yesterday at 9:27 AM

harshness said:
Unless the specific product or its packaging is known at the time of weighing, estimating the tare weight for a PoS system is a tall order.

I'm pretty sure that produce bags can't get any thinner.

You certainly don't want to put unbagged produce on a belt, scale, or in a clerk's hands (gloved or not).

I would think that all the packaging would already be accounted for ... they weigh the container, subtract that from the scale, then add the product , so its weighing the Product only

Reactions: Bobby, dishstaller and NYDutch

harshness

Today at 4:42 PM

Jimbo said:
I would think that all the packaging would already be accounted for ... they weigh the container, subtract that from the scale, then add the product , so its weighing the Product only.

You would be thinking wrong when it comes to goods that are sold by weight (meat, produce, nails). Those items typically go on the scale wrapped without an associated tare. The weight only excludes the sticker because it hasn't been printed yet.

Jimbo

Today at 5:08 PM

harshness said:
You would be thinking wrong when it comes to goods that are sold by weight (meat, produce, nails). Those items typically go on the scale wrapped without an associated tare. The weight only excludes the sticker because it hasn't been printed yet.

Thats ridiculous ....

Thats not how Deli does it, I know your talking pre packaged.
They need to CHANGE that.

harshness

Today at 6:50 PM

Jimbo said:
Thats not how Deli does it, I know your talking pre packaged.

Perhaps only for sliced meat and cheese. Salads and similarly "shifty" or "drippy" items are typically weighed in deli cartons of some sort.

My monster burritos (up to two lbs.) are weighed in their foil jackets or paper mache take-out trays, and the jacket/tray is then "sealed" with the printed label as it comes off the printer.

Precision has to give way to practicality in situations like that.

TRG

Today at 8:38 PM

Jimbo said:
Now check and see if any of them (probably a few) are actual Ice Cream ...

Most Ice Creams are Not actual Ice Cream.
Bryers for example, call Most of thiers "Frozen Dairy Dessert"

I only buy Tillamook and Alden's ice cream. The first ingredients are milk and cream.

Reactions: Bobby

Jimbo

42 minutes ago

harshness said:
Perhaps only for sliced meat and cheese. Salads and similarly "shifty" or "drippy" items are typically weighed in deli cartons of some sort.

My monster burritos (up to two lbs.) are weighed in their foil jackets or paper mache take-out trays, and the jacket/tray is then "sealed" with the printed label as it comes off the printer.

Precision has to give way to practicality in situations like that.

What ever I get out of the Deli is put into a container when I ask them for it, they weight the container and then add the deli product, thats the way its suppose to be, if the rest of the world is screwing you, you should try the place down the street.

Reactions: Bobby

Jimbo

38 minutes ago

TRG said:
I only buy Tillamook and Alden's ice cream. The first ingredients are milk and cream.

$7.50 a 1/2 gallon, thats worse than Bryers price wise.

Jimbo

34 minutes ago

Jimbo said:
$7.50 a 1/2 gallon, thats worse than Bryers price wise.

I'll give that a try next time, if I can find some in the right sugar areas.

Juan

33 minutes ago

Jimbo said:
What ever I get out of the Deli is put into a container when I ask them for it, they weight the container and then add the deli product, thats the way its suppose to be, if the rest of the world is screwing you, you should try the place down the street.

They are probably cheating you by swapping store brand product for name brand...those store deli's are very sketchy

Bobby

21 minutes ago

$5.69 for the 48oz of Rocky Road at my Walmart.

Bobby

17 minutes ago

Jimbo said:
I'll give that a try next time, if I can find some in the right sugar areas.

22g per serving.

Juan

6 minutes ago

Bobby said:
22g per serving.

How much is a serving?

Bobby

A moment ago

Juan said:
How much is a serving?

2/3 of a cup, a large scoop.

View all replies (46)

TWiT Tech Podcast Network

6 minutes ago · posted in TWiT Tech Podcast Network

Foursquare’s Hidden Location Data Became a Game #shorts

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/shorts/kBKUeLHP3zY

Direct YouTube Link - Foursquare's Hidden Location Data Became a Game #shorts
TWIT's Website
TWIT Live Feed

0 Replies · 0 views

Replies Reply Legacy View

juventusbrown

20 minutes ago · posted in C-BAND Satellite Discussion

40w transponder

Hi guys, is anyone getting any quality on transponder 4135 L 30000 I'm not getting any quality few weeks now.

0 Replies · 3 views

Replies Reply Legacy View

Scott Greczkowski

Staff member HERE TO HELP YOU! Cutting Edge

Last reply Today at 8:44 PM · posted in Free To Air (FTA) Discussion

Memories

View: https://youtu.be/2B6vCcmvnJc?si=i-ewdyqeAwBWEPgR

13 Replies · 273 views

Load Replies (13) Reply Legacy View

Reactions: iBoston, byron, osu1991 and 5 others

reubenray

Oct 14, 2026

I had a BUD in the 80's before the little small dishes started showing up. The signals were unsrambled and then I had to get a monthly code.

Reactions: dfergie

dfergie

Oct 14, 2026

I forgot about the tv antenna rotator to change polarity…

telstar_1

Oct 14, 2026

reubenray said:
I had a BUD in the 80's before the little small dishes started showing up. The signals were unsrambled and then I had to get a monthly code.

You mean you were pirating the VCII and entering "Wizard numbers" every month after key change? GI finally resorted to changing out the keys twice as often, then even more often, down to just hours, making it mostly untenable?

Reactions: FTA4PA and reubenray

iBoston

Today at 5:55 PM

When i was a kid, i used to salivate envisioning me having a Cband dish. It wasn't until about 1995, I installed my first Cband dish, and i remember it took me about 2 weeks to get that dish aligned properly.. This was before internet, and i had to call and talk with people on the phone about advice on how to properly tune the dish. I can't remember the receiver, but it had a UHF remote. I had the satellite receiver in the living room, but i ported it to two TV's, one in the living room and one in the bedroom. It was so nice being able to control the receiver with the remote in the bedroom about 40 feet from the living room. I remember watching Rosanne feeds where it would air the entire week in succession. Nice nostalgia.

Reactions: SDA_FL_USA and Mr Tony

navychop

Today at 6:08 PM

iBoston said:
I remember watching Rosanne feeds

I'd wipe THAT memory ASAP!

WhiteBeard

Today at 8:44 PM

navychop said:
I'd wipe THAT memory ASAP!

Why?

View all replies (13)

Tom Speer

Staff member Pub Member / Supporter Cutting Edge

Last reply Today at 8:29 PM · posted in DIRECTV Cutting Edge Information

DIRECTV Cutting Edge Non Disclosure Agreement

In order to participate in any Cutting Edge testing, you must sign a Non Disclosure Agreement (NDA). Attached are a .docx (Microsoft Word) and PDF version of the latest DirecTV NDA. I found it easiest to complete the .docx version then paste a photo or scan image of my signature, cropped closely to just the signature into it as a picture. Then set Word to wrap text around the picture so that the picture follows the text "Signature".

People who have better PDF tools than I do may prefer that version.

When you apply for any Cutting Edge testing, you will be told how to send the signed copy.

NONDISCLOSURE AGREEMENT (testers v2).docx 19 KB NONDISCLOSURE AGREEMENT (testers v2).pdf 95 KB

2 Replies · 71 views

Load Replies (2) Reply Legacy View

Tom Speer

Today at 4:02 PM

Any NDA you have signed before is still valid for the testing you have been and hopefully still are doing. The new NDA forms are ror new CE testers and new categories of CE testing. They have been placed here so that people who volunteer for any CE testing have access to them.

larry55

Today at 8:29 PM

Tom Speer said:
Any NDA you have signed before is still valid for the testing you have been and hopefull still are doing. The new NDA forms are ror new CE testers and new categories of CE testing. They have been placed here so that people who volunteer for any CE testing have access to them.

I'm still doing the testing.

TWiT Tech Podcast Network

Today at 8:12 PM · posted in TWiT Tech Podcast Network

Artemis III

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/watch?v=jXOU5kJ8crU

Direct YouTube Link - Artemis III
TWIT's Website
TWIT Live Feed

0 Replies · 6 views

Replies Reply Legacy View

Gary Toma

Staff member Pub Member / Supporter Cutting Edge

Last reply Today at 8:11 PM · posted in DIRECTV Technical Resources Forum

DIRECTV Transponder Map ~ Data 10/21/2026

The TPN Map Excel Presents all DIRECTV Channels:

National (50-States or wide/NAT+PR beams)
Local (Local-Into-Local or narrow/Spot beams)

Additional tabs provide:

OTA the (Over-The-Air) Database
VOD (Video On_Demand) Records
Offline Records
Engr Records
Net Decoder a graphic presentation of all satellites and transponders

Domestic Satellites
@99W...... D11, D14
@101W.... D16
@103W.... D12, D15
@110W.... D5
@119W.... D8

Understanding the TPN Map

Making Sense of the TPN Map Display Conventions

DIRECTV_TPN_Map_261021.xlsx 1,876 KB

2164 Replies · 937391 views

Load Replies (2164) Reply Legacy View

Reactions: Zakdj, Mr Tony, Tom Speer and 3 others

KyL416

Today at 3:20 PM

660 CAVLIERS, 668 TWOLVES and 680 SPURS are now available

Reactions: Mr Tony, coolman302003 and Nate.O’Brien

KyL416

Today at 6:57 PM

WPLG Miami is testing on the stream server again

Reactions: Nate.O’Brien

Mr Tony

Today at 7:27 PM

KyL416 said:
660 CAVLIERS, 668 TWOLVES and 680 SPURS are now available

Still with Choice package? My stepdad says when the game started he got black screen and something to do with not the right package.
He had the Twins the last 2 years and I saw the Wild screen on 668-1 when I was there a few weeks ago.

KyL416

Today at 7:56 PM

There were some technical issues during the pregame, where 668 was showing the Pacers feed instead of the Timberwolves feed until a few minutes before the game.

On the stream API it looks like some areas need the Sports Pack, what's his zip code?

Reactions: Mr Tony

Mr Tony

Today at 8:08 PM

KyL416 said:
There were some technical issues during the pregame, where 668 was showing the Pacers feed instead of the Timberwolves feed until a few minutes before the game.

On the stream API it looks like some areas need the Sports Pack, what's his zip code?

55379
It's Shakopee (suburb of Minneapolis and considered part of the Twin Cities). They have the satellite version, not streaming

KyL416

Today at 8:11 PM

The BLUES, BLUJCKTS, HURCANES and WILD channels are now active and no longer pointing to the TV Promise slate

Reactions: Mr Tony

View all replies (2164)

Bobby

Supporting Founder Lifetime Supporter

Last reply Today at 7:25 PM · posted in DISH Network Support Forum

4K Events Discussion Thread

This thread is a place to discuss the 4K events that appear on channel 540. We are getting, at this point, one college football game a week. Let's hope there is more coming.

1933 Replies · 299559 views

Load Replies (1933) Reply Legacy View

Reactions: Rixos, DWS44 and charlesrshell

Bobby

Oct 13, 2026

MLB, Brewers at Dodgers, Thursday 10-15, 6PM PDT, Channel 148-02.

Reactions: charlesrshell

Foxbat

Oct 15, 2026

Bobby said:
MLB, Brewers at Dodgers, Thursday 10-15, 6PM PDT, Channel 148-02.

Bobby said:
CFB, Notre Dame at BYU, Saturday 10-27, 4:30PM PDT, Channel 148-03.

Bobby said:
CFB, Ohio State at Indiana, Saturday 10-17, 9AM PDT, Channel 148-01.
CFB, Arizona State at Texas Tech, Saturday 10-17, 12:30PM PDT, Channel 148-01.

Hmmm, I'm not seeing anything like those events in our Hopper 3 guide for tonight or Saturday.

I went into the Tools menu and requested a Guide Update. I'll try looking at it after the update completes.

edit — I now have the 148-01 4KFox events for Saturday, but not anything for 148-02 or 148-03 which don't even show as available channels. I do have 148-04 4KUSA.

Reactions: charlesrshell

Bobby

Oct 15, 2026

Foxbat said:
Hmmm, I'm not seeing anything like those events in our Hopper 3 guide for tonight or Saturday.

I went into the Tools menu and requested a Guide Update. I'll try looking at it after the update completes.

edit — I now have the 148-01 4KFox events for Saturday, but not anything for 148-02 or 148-03 which don't even show as available channels. I do have 148-04 4KUSA.

As I recall you have the Flex package. Do you sub to multisport? -02 is FS1 and -03 is ESPN. -01 is Fox so you would get that if you sub to locals.

Reactions: Foxbat and charlesrshell

Bobby

Oct 15, 2026

Bobby said:
As I recall you have the Flex package. Do you sub to multisport? -02 is FS1 and -03 is ESPN. -01 is Fox so you would get that if you sub to locals.

As an edit, you need to sub to the National Action Pack at $12 a month to receive those channels.

Reactions: Foxbat and charlesrshell

Foxbat

Oct 15, 2026

Which is what is interesting, I see the 4KFox channel on 148-01 but we're not subscribed to our Locals. So why it's coming in is puzzling. I thought that maybe it was a perk for Dish subscribers for the MLB Postseason.

I set a Timer for the Indiana - Ohio State game on Saturday. I'll take advantage of it while I can.

Reactions: long_time_Dish, slow_poke_pete and charlesrshell

Foxbat

Today at 4:48 PM

Foxbat said:
I set a Timer for the Indiana - Ohio State game on Saturday. I'll take advantage of it while I can.

Even though it didn't work out for the Hoosiers, this event recorded and I was able to watch it in full 4K HDR.

Bobby said:
MLB, Rays at Brewers, Friday 10-23, 5PM PDT, Channel 148-01.

Timer is set to Record the Series. Thanks, Bobby!

Reactions: long_time_Dish, charlesrshell and Bobby

long_time_Dish

Today at 7:25 PM

No NASCAR in 4K on Sunday? Bummer...

Reactions: charlesrshell

View all replies (1933)

Scott Greczkowski

Staff member HERE TO HELP YOU! Cutting Edge

Last reply Today at 7:21 PM · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne

Get it?

An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....

68586 Replies · 2676558 views

Load Replies (68586) Reply Legacy View

Reactions: c-spand

long_time_Dish

Today at 4:23 PM

Go On Cry - Heart

Reactions: dishstaller

dishstaller

Today at 4:25 PM

Let Her Cry - Hootie & the Blowfish

harshness

Today at 4:33 PM

Let Her In - Vince Gill

sdfntx

Today at 4:52 PM

Devil in Her Heart - The Beatles

long_time_Dish

Today at 7:21 PM

Take Me To Heart - Quarterflash

View all replies (68586)

iJustine

Today at 6:33 PM · posted in iJustine

iPhone Duo Day at The Apple Store Los Angeles!

Time for another AWESOME video from iJustine!

View: https://www.youtube.com/watch?v=q8XjBdqOb-0

Direct YouTube Link - iPhone Duo Day at The Apple Store Los Angeles!
The official iJustine Website's Website
Buy her book!

Search

Search

Social Feed

question

You can't even trust the cost per ounce info in grocery stores anymore

Foursquare’s Hidden Location Data Became a Game #shorts

40w transponder

Memories

DIRECTV Cutting Edge Non Disclosure Agreement

Artemis III

DIRECTV Transponder Map ~ Data 10/21/2026

4K Events Discussion Thread

Song Name Game Part 3!

iPhone Duo Day at The Apple Store Los Angeles!