Social Feed

badhat
Last reply · posted in Free To Air (FTA) Discussion
I got a Digipower SG-2100 with a 50mm motor tube. Is there a special trick to getting this replacement motor tube to fit? I have the original tube off but the replacement tube doesn't line up enough to where I can get the bolt back through it.
15 Replies · 2732 views
badhat
I did notice that I did that this morning. I am about to go out and give it a go. I will post back once I find out. :P
stogie5150
I did notice that I did that this morning. I am about to go out and give it a go. I will post back once I find out. :P

Let us know. :)

I did find out that the kind of setup you are using is no good for a 1m P*, only for the ovals, the 1m dish is just too heavy for a setup like that, it flexes all over...:)
badhat
Yeah I think I am finding that out. Are you talking about the angle iron or the mount I robbed from the directv dish? I think I might run down to home depot and get some pvc and use original mount if I completely fail with this setup.
stogie5150
Yeah I think I am finding that out. Are you talking about the angle iron or the mount I robbed from the directv dish? I think I might run down to home depot and get some pvc and use original mount if I completely fail with this setup.

The part you robbed from the Directv Dish. Just turn it over and bolt it back up. The arm attachment points on the D* bracket are what I had to cut off from mine for clearance. :)

Here ya go, I looked in my trash bin,er....PARTS PILE...yeah that's it....here's the bracket I used. I just cut it off, dressed it a bit with a file to remove the burrs, and shot a little rust oleum paint on it to ward off rust.
badhat
Yeah that's basically how I had it in the end. I wasn't able to quite get the elevation I needed... with the motor elevation set and the dish is almost pointed straight ahead here aiming at 119W for my true south. Anyhow.. I never did get fed up with any of this today... but I did finally give up and thought I would just screw around with the motor. But guess what... I could hear a click but no movement. Go figure... did I ever mention I have very bad luck? :P
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68664 Replies · 2680707 views
  • Like
Reactions: c-spand
sdfntx
Take It as It Comes - Steve Winwood
  • Like
Reactions: EatMyVolts
long_time_Dish
Take The Money and Run - Steve Miller Band
EatMyVolts
Run Joe -- Louis Jordan and his Tympany Five
  • Like
Reactions: Bobby
long_time_Dish
The Long Run - The Eagles
  • Like
Reactions: ClarkGable
ClarkGable
Long Train Runnin' - The Doobie Brothers
meStevo
Lifetime Supporter
Last reply · posted in TV Shows
Starting a thread klang !

After an amazing first 2 seasons and an 8 episode 3rd season still coming this year, season 4 has now been greenlit.

Keri Russell Wow GIF by NETFLIX
12 Replies · 1036 views
  • Like
Reactions: klang
K
Finished season 3 last night. Still one of my favorite shows.

Anyone else wonder if there might be something else going on with Callum? Seems to me he has too much access to Russian intelligence.
meStevo
One episode into season 4 that dropped today...

Jon Stewart Popcorn GIF
  • Like
Reactions: NYDutch
meStevo
Renewed for season 5.
  • Like
Reactions: NYDutch
K
Finished 4 last night. Great stuff.

They do like to end each season with a Bang!
KAB
KAB
Finished 4 last night. Great stuff.

They do like to end each season with a Bang!
Great ending, but it ran in circles most of the season.
M
Last reply · posted in DISH Network Support Forum
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
5 Replies · 224 views
Almighty1
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
I have a DISH Hopper 3 (Software H713) with Hopper Plus (Software P15403). I have not tried streaming services but I primarily watch TVB Jadeworld international package which is only available by streaming and when I have an issue, I usually have to go to a non-streaming satellite channel first before the streaming channels will work again. What software versions do you have and what is the error message if any are showing on your screen? or is that Dish downloading logo just stuck and never finishes?
  • Like
Reactions: charlesrshell
M
I have a DISH Hopper 3 (Software H713) with Hopper Plus (Software P15403). I have not tried streaming services but I primarily watch TVB Jadeworld international package which is only available by streaming and when I have an issue, I usually have to go to a non-streaming satellite channel first before the streaming channels will work again. What software versions do you have and what is the error message if any are showing on your screen? or is that Dish downloading logo just stuck and never finishes?
I'm on H713 on the Hopper and P15403 on the Hopper Plus. It shows internet connection issues and doesn't finish loading the various services. I see the "loading circle going around. Sometimes I get a message saying that the service is having trouble loading my content and to check the internet connection.
  • Like
Reactions: charlesrshell
Almighty1
I'm on H713 on the Hopper and P15403 on the Hopper Plus. It shows internet connection issues and doesn't finish loading the various services. I see the "loading circle going around. Sometimes I get a message saying that the service is having trouble loading my content and to check the internet connection.
Did it ever work correctly before? Hard to say what the problem is. Usually for streaming, it will show the Dish logo with lines sweeping down to show downloading, never seen the circle issue. Did you try a manual reboot, red button reset, power cord unplug/replug to see if it makes a difference.
  • Like
Reactions: charlesrshell
S
Did it ever work correctly before? Hard to say what the problem is. Usually for streaming, it will show the Dish logo with lines sweeping down to show downloading, never seen the circle issue. Did you try a manual reboot, red button reset, power cord unplug/replug to see if it makes a difference.
Might be worth just to ditch the hopper plus. No issues here on h713
  • Like
Reactions: charlesrshell
S
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
Buy a roku and dump the hopper plus you'll be better off. If you have a smart tv you don't need either one. No hopper plus here and no issues!!!
  • Like
Reactions: charlesrshell
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 18 views
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 1 views