Social Feed

db130
Last reply · posted in DISH Network Support Forum
i signed up for the turbo hd silver+locals+dvr advantage package back in october. here is setup installed by the dish tech:

a single wire is coming from the 500 dish on the roof onto the grounding block by the side of the house. another wire then enters the house from the grounding block and goes to a basement diplexer. the satelite feed from the diplexer then goes to the livingroom where the 722 is. the 722's TV2 RF output is then carried back on the TV1 input wire via a diplexer back to the diplxer back in the basement. the basement diplexer's TV feed then goes to a bedroom SD CRT tv.

all worked well for 2 months. i was as happy as a clam. then i decided to buy a HDTV for the bedroom. the SD signal from the TV2 output is acceptable but obviously not HD quality. i bought a working 221k for the bedroom. i got rid of all of the diplexers and was hoping to run a multiswitch where the basement diplexer used to be.

would my proposed setup work? if not, would i need to run a 2nd wire from the grounding block all the way out to where the bedroom tv is? OR would i need run a 2nd wire all the way from the LNBF? thank you in advance.
6 Replies · 1863 views
db130
Thank you for responding.. The Dish promo for a 612 dvr installed for $25 sounds like a much easier alternative at this point.
db130
I was misinformed.. I actually have a 1000.4 dish and a
DP Plus 1000.4 LNBF. The previously described wiring is the same though. I seem to have ONE wire from the LNB running to the grounding block, then one wire coming from the grounding block entering the house where it goes to a 722. The 1000.4 LNBF doesn't seem to have the necessary coax jack to run a 2nd wire to the grounding block. What would I need to run a 2nd receiver(a 211k)?
Jim5506
Along the bottom of the LNB head on the 1000.4 there are 3 connections for RG-6 coax out to receivers and one input (see attached picture).

Each of these three can support one dual tuner receiver.

You will have to open up the LNB head and string another RG-6 to port 2 inside the LNB, run it to the grounding block and then run it to the new receiver's seperator.

This is a link to the installation manual for the 1000.4 - might be helpful:

http://www.satelliteguys.us/images/Eastern_Arc_Antenna_Instructions.pdf

NOTE: I believe the satellite connection labels on the bottom of the LNB are incorrect because the internal switch makes each of these three ports available to all three LNB's.
db130
that makes sense now... one last thing, if i hook up an OTA antenna to the LNB's input jack, would the OTA signal be carried down to the grounding block onto the existing single wire that is entering the house? would a diplexer then be able to separate the OTA and dish signal appropriately?
B
No. The LNB In jack only accepts a DishPro LNB.

Unfortunately, Dish does not have a switch with an integrated diplexer. You will have to add a diplexer to the receiver output to combine the signals, then another inside to break them out. If both/all receivers need OTA, you need to split it outside to feed a diplexer on each receiver output, or diplex on just one line as before then split and distribute it after the inside diplexer, whichever way is more practical given the available wiring.
Neutron
Supporting Founder
Last reply · posted in The Chit Chat Club
Patrick Stewart died yesterday, October 28th at the age of 86. We lost yet another great actor. :(

1 Replies · 4 views
T
1793305116126.webp
  • Like
Reactions: sdfntx
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
4 Replies · 63 views
  • Like
Reactions: dfergie
dishstaller
Sorry for posting the wrong link. Just corrected it.
  • Like
Reactions: Foxbat
dfergie
I loved it when Rodney was on the Tonight Show...
Foxbat
Sorry for posting the wrong link. Just corrected it.
Thanks, I wasn't sure if you had the wrong Subject or the wrong YouTube link.
"MysteryMan"
Pub Member / Supporter Cutting Edge
Last reply · posted in Computers and Gadgets
I created this thread on the original Edgecutter Cutting Edge Forums site. It's simply a place for those to review the latest software available for those using Windows 10 and Windows 11. To date it has received 112,559 views. I have been asked by staff to continue this thread here.
524 Replies · 48047 views
EarDemon
If it wasn't for what I want, I wouldn't need any of this.

Do I need a collection of handheld radios, scanners and speed enforcement countermeasures? Nope, but I want them. Very little, if any of the software used to interface with these devices is available on Linux.
WhiteBeard
If it wasn't for what I want, I wouldn't need any of this.

Do I need a collection of handheld radios, scanners and speed enforcement countermeasures? Nope, but I want them. Very little, if any of the software used to interface with these devices is available on Linux.
To each there own but I've found that Windows can't do much more than Linux can. Can't have everything. ☹️
  • Haha
Reactions: meStevo
EarDemon
To each there own but I've found that Windows can't do much more than Linux can. Can't have everything. ☹️
For niche use cases, yes I agree. Kali for ethical hacking and security testing, and running a Cacti server for network monitoring are the two things I have experience in. Plus thousands and thousands of other things, but for every day use I just can't see it. The owner of the GMRS repeater that I pay to access is changing the Tx DPL tones tomorrow, while Chirp is available on Linux, the software to program my MXT500 is not.

I run Fedora and Ubuntu in VMWare, honestly I don't care much for the UI of either of them and I don't feel like spending days/weeks to customize the UI to make it look Windows-like when I could just use Windows. The cartoonish dock at the bottom of the screen reminds me of Apple products.
harshness
I don't care much for the UI of either of them and I don't feel like spending days/weeks to customize the UI to make it look Windows-like when I could just use Windows.
What is so fantabulous about the Windows UI? By many accounts, it has been going downhill since Windows 7.

There are Linux desktops that offer Windows or Mac UIs, yet you don't hear much chatter about them outside of questions about when the creators might get sued.
  • Like
Reactions: HipKat
EarDemon
What is so fantabulous about the Windows UI?
Because it's what I prefer. I know I've said this a few times, I use Open Shell to give me the cascading start menu a la WIN 95 and NT4.0. The only reason I went from Windows Vista to 7 back in the day was because of Classic Shell. I cannot stand anything other than the OG start menu from 30+ years ago. I'm using ExplorerPatcher to give me Windows 10 UI elements of the taskbar and right click context menus.

If you could take a look at how I set up Windows 95, you'd find many similarities to how I use 11.
  • Like
Reactions: cp2k
EarDemon
I could probably use that as a starting point, but I don't like the full size icons. If you have to click on each folder that's also a no-go for me, it has to be cascading.

I used to have Peppermint Linux in a VM, that was about as close as I could get to recreating a Windows NT4.0 style of menu structure, but I could never get it to scale properly in VMWare on a 4K display and eventually gave up.

Whatever the boot up time it's fine with me. The longest part of my bootup is the HP SureStart BIOS integrity check. Once that is done, it's only a few more seconds. I haven't done this reg tweak yet since the reformat, but I switched the bootup animation to the Windows 10 style spinning circle of dots, and it's two and a half rotations. I can live with that.
harshness
Because it's what I prefer.
I hope you don't believe that makes it wonderful (especially when you're using workarounds for Microsoft's malfeasance).

I use LibreOffice as opposed to Microsoft office (even in Windows) because it's UI is like the Office of old, so I'm putting my money where my mouth is (in a manner of speaking). The ribbon was one of the worst ideas to come out Redmond.
HipKat
I could probably use that as a starting point, but I don't like the full size icons. If you have to click on each folder that's also a no-go for me, it has to be cascading.

I used to have Peppermint Linux in a VM, that was about as close as I could get to recreating a Windows NT4.0 style of menu structure, but I could never get it to scale properly in VMWare on a 4K display and eventually gave up.

Whatever the boot up time it's fine with me. The longest part of my bootup is the HP SureStart BIOS integrity check. Once that is done, it's only a few more seconds. I haven't done this reg tweak yet since the reformat, but I switched the bootup animation to the Windows 10 style spinning circle of dots, and it's two and a half rotations. I can live with that.
I used to pin the C: drive to the Win Taskbar and it would open in cascading style
"MysteryMan"
2026-10 Preview Update Builds: 26300.9818 and 26200.9818 (KB5127936) has been released. Moderate time needed for those choosing to perform a manual download/install/restart. Quality improvements only. No new operating system features.
  • Like
Reactions: Tweek
JSheridan
Actually it looks like there are a lot of features new or updated, although most are on a gradual rollout schedule.

M
Last reply · posted in Over the Air Television By RabbitEars.Info
Interesting article about the work being done to develope an ATSC 3 converter box. Yes it does mention affordable.
13 Replies · 742 views
primestar31
DEATH TO NEXGEN!
star trek GIF


It's dead, they just don't know it yet. They killed it by forcing DRM on it, and that TOTALLY botched implementing it.

There is absolutely NO compelling reason for anybody to switch to ATSC3.0. They only want it as a total and complete money grab.
Mister B
What bothers me is the total waste of broadcasting spectrum in this very crowded market. It has been almost three years now since KFOX converted their broadcast tower to ATSC 3.0 and moved all of their channels to other towers causing noticeable degradation of the picture quality.
I have a Sony TV with 3.0 capabilities but still use the 1.0 version of locals due to the fact that one or all of the 3.0 channels are often missing or unwatchable. In this city of 800K I doubt that more than a few hundred even know about ATSC 3.0.
The only thing that could motivate me to be interested in 3.0 would be if all of the minor networks (diginets) could be in at least 720P rather than blurry ultra-compressed 480i.
Three years is long enough to waste one of the few available RF frequencies in the area for this trial.
It is time to either move on with this experiment or call it quits.
navychop
It is time to either move on with this experiment or call it quits.

QFT. Of course, my preference involves a curb and some kicking.
  • Like
Reactions: FTA4PA
S
star trek GIF


It's dead, they just don't know it yet. They killed it by forcing DRM on it, and that TOTALLY botched implementing it.

There is absolutely NO compelling reason for anybody to switch to ATSC3.0. They only want it as a total and complete money grab.
WHAT ABOUT THE INTERNET PART OF IT. NO ONE WANTS A BOX CONNECTED TO THE INTERNET EITHER.
navychop
Cough, cough. COVID vaccine implants.

:oldlaugh
  • Haha
Reactions: HIFI
Foxbat
Cough, cough. COVID vaccine implants.

:oldlaugh
That would be handy. Download the latest RNA snippets that can be updated over 5G and no more shots! You're a Genius!
  • Haha
Reactions: navychop
R
I want it and I have to have it.

I can neuter the phoning home with adguard home so it won't be doing that in my castle but I prefer without Internet so that my TVs in the house don't turn into e-waste
M
Last reply · posted in DISH Network Support Forum
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
1 Replies · 91 views
Almighty1
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
I have a DISH Hopper 3 (Software H713) with Hopper Plus (Software P15403). I have not tried streaming services but I primarily watch TVB Jadeworld international package which is only available by streaming and when I have an issue, I usually have to go to a non-streaming satellite channel first before the streaming channels will work again. What software versions do you have and what is the error message if any are showing on your screen? or is that Dish downloading logo just stuck and never finishes?
  • Like
Reactions: charlesrshell
dishstaller
Pub Member / Supporter Lifetime Supporter
· posted in The Chit Chat Club
It states the average amount they are under water is OVER $7,000. :eek

Personally, I tend to be the type that drives a vehicle for a lot of years....do my own oil changes and other fluid changes. Just replaced the spark plugs and a couple coils. Youtube is great for things like this.

0 Replies · 11 views
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68659 Replies · 2680291 views
  • Like
Reactions: c-spand
Bobby
98.6 - Keith
harshness
I'm Easy - Keith Carridine
gms49ers
It's Easy - Boston
  • Like
Reactions: long_time_Dish
RaiderPower
Take It Easy On Me - Little River Band
long_time_Dish
Take It Easy - The Eagles
  • Like
Reactions: gms49ers
jamieh1
Last reply · posted in DIRECTV Programming Forum
DIRECTV Stream/Internet added Ch 4105 SportsGrid
268 Replies · 38723 views
  • Like
Reactions: c-spand and KyL416
K
Now live:
4101 Yahoo! Sports Network
4121 DP World Tour
4195 F1 Channel
4196 MotoGP Channel
K
Now live:
4275 Law & Crime
4364 Military Makeover Channel
K
Game Show Central is now live on channel 4342
K
Now live:
4101 Yahoo! Sports Network
4121 DP World Tour
4195 F1 Channel
4196 MotoGP Channel
It only took them 41 days to announce it
  • Like
Reactions: Mr Tony
K
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 7 views
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
We have a Breakfast and Dinner thread so... :)
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
5449 Replies · 336098 views
TRG
TRG
Club sandwich and corn chowder. Iced tea.
dfergie
Chili dog bowl, water… (homemade chili)
TRG
TRG
Leftover wanton soup and pork fried rice. Water.
dfergie
IMG_5955.webp

Sweet tea…
  • Like
Reactions: Bobby and TRG
TRG
TRG
Tuna salad sandwich on toasted honey whole wheat bread with a handful of kettle chips. Water.
  • Like
Reactions: Bobby