Social Feed

linuxman
Last reply · posted in Free To Air (FTA) Discussion
I got the bright idea the other day to make an attempt at getting as much of the Ku arc viewable from North America as possible using fixed Ku dishes and multi-lnbfs.

I want to be able to receive these signals on at least 2 receivers, perhaps more in at least 2 different rooms.

I have several Primestar 84es and one 75e currently. I know where I can get a couple more real easily.

I know several members here who have accomplished this using both un-committed and committed diseqc switches, and some who have used 22Khz switches only. I am going to attempt lnbs at 4 degrees apart as shown in my layout below. If you think I can get more than 3 lnbfs on each dish and how to place them that would be great. Keep in mind, that I would like to retain good reliable signal for each satellite. :D

If there is a better way to lay this out, please elaborate on your setup with picuters drawings etc. That would be very helpful. :)

Here is my current plan:

Dish 1
74W (H2 AKA SBS6)
79W (AMC5)
83W (AMC9)
72W (AMC6)

Dish 2
85W (AMC2)
89W (G28 AKA IA8)
93W (G26 AKA IA6)

Dish 3
87W (AMC3)
91W (G17 AKA G11)
95W (G3)

Dish 4
97W (G25 AKA IA5)
101W (AMC4)
105W (AMC15)

Dish 5
99W (G16 AKA G4)
103W (AMC1)
107.3W (AnikF1)

Dish 6
121W (Dish 121)
125W (AMC21)
129W (G27 AKA IA7)
148W (Dish 148)

Dish 7
123W (G18 AKA G10)
127W (Horizon 1)

Dish 8
30W (Hispasat)
43W (IS-3R)



Dish Optional 1
107.3 (AnikF1)
110 (Dish 110)
119 (Dish 119)

Dish Optional 2
111.1 (AnikF2)
113 (Satmex6)
116.8 (Satmex5)
260 Replies · 46341 views
Anole
not that anyone cares:

If memory serves, there were some proponents of using a boat-seat swivel of some sort, to skew a dish.
It went for maybe 10 dollars (?) at the local hardware of sporting store.
Whether that would be up to the task of supporting a 6' Prodelin, I have no idea.

I thought about using one, but didn't see a good way to hold the dialed-in skew.
And in truth, it wasn't really necessary for my needs back then.

At least, that's one search word that should be rare in the FTA section: boat. :D
linuxman
If memory serves, there were some proponents of using a boat-seat swivel of some sort, to skew a dish.
It went for maybe 10 dollars (?) at the local hardware of sporting store.
Whether that would be up to the task of supporting a 6' Prodelin, I have no idea.

I thought about using one, but didn't see a good way to hold the dialed-in skew.
And in truth, it wasn't really necessary for my needs back then.

At least, that's one search word that should be rare in the FTA section: boat. :D
Well, I tried searching using the word "boat", and it is not as rare as we might think. I did find a thread with a reference to the "boat seat swivel" with a link to Cabela's in it here..

It's a shame, but there weren't any pictures of the modified Primestar using the boat seat, but it sounded like Primestar31 made it work.

I'll give it a shot in the fall and see what I can make it do. If it works out, I'll convert all the Primestars that aren't near the top to being skewed. :D

Thanks!!
Anole
need pictures:

... link to Cabela's in it here..

It's a shame, but there weren't any pictures of the modified Primestar using the boat seat, but it sounded like Primestar31 made it work. :D

Thanks!!
... and you can buy them at Walmart.
That swivel plate is available at Walmart....? Really? Worth a visit!
Here's a bit more discussion on what he did.

But, it looks like Primestar31 posted as recently as last Friday, so he's still around.
We just need to twist his arm for those pictures.
Probably should be a thread of its own. - :up

edit:
I just PM'd him.
Anole
You're right.
Click this instead:
primestar31
If not in this post, then above.

Think it's a change to the forum software since that long ago.
I'll see if I can get a proper link....
primestar31
That swivel plate is available at Walmart....? Really? Worth a visit!
Here's a bit more discussion on what he did.

But, it looks like Primestar31 posted as recently as last Friday, so he's still around.
We just need to twist his arm for those pictures.
Probably should be a thread of its own. - :up

edit:
I just PM'd him.

I'm not the originator of the idea, but I don't remember his name anymore. However, it's not magic, it's real easy. I bought my boat seat swivel bases from my local Walmart, for around $5 US at the time a few years ago. You have to slightly enlarge the oval holes in the swivel base first, and then they mate up to the bolt holes on a Primestar dish perfectly.

You then simply remove the fiberglas reflector from the metal elevation mount by removing the 4 bolts, and bolt the fiberglas reflector to ONE side of the swivel base (w/short bolts and flat washers). Then, the other side of the boat seat swivel base plate bolts to the metal elevation mount.

You then skew it the way you need to. When you get it where you want it, a drilled and tapped hole between the 2 plates and the elevation mount will take another bolt, that locks them together, and locks the dish in that position.

This might not be strong enough to do the same thing with a 6ft dish, if you are using an actual boat seat swivel, and not something engineered stronger for that size dish. Unless that dish was very light weight, say spun aluminum.

Also, I've included some pics showing how to use some EMT tubing, to make a new lnb mount. You then use electrical emt hangers, to mount lnbs along the tubing, where needed to get the sats you need.
linuxman
I'm not the originator of the idea, but I don't remember his name anymore. However, it's not magic, it's real easy. I bought my boat seat swivel bases from my local Walmart, for around $5 US at the time a few years ago. You have to slightly enlarge the oval holes in the swivel base first, and then they mate up to the bolt holes on a Primestar dish perfectly.

You then simply remove the fiberglas reflector from the metal elevation mount by removing the 4 bolts, and bolt the fiberglas reflector to ONE side of the swivel base (w/short bolts and flat washers). Then, the other side of the boat seat swivel base plate bolts to the metal elevation mount.

You then skew it the way you need to. When you get it where you want it, a drilled and tapped hole between the 2 plates and the elevation mount will take another bolt, that locks them together, and locks the dish in that position.

This might not be strong enough to do the same thing with a 6ft dish, if you are using an actual boat seat swivel, and not something engineered stronger for that size dish. Unless that dish was very light weight, say spun aluminum.

Also, I've included some pics showing how to use some EMT tubing, to make a new lnb mount. You then use electrical emt hangers, to mount lnbs along the tubing, where needed to get the sats you need.

Thank you very much!

It is a great idea, and I will make a trip to the local Walmart to see what I can find. :)

Probably won't put them on until Fall, but I will definitely give it a try.

As you said, I don't think it would work for the Prodelin 6 foot dish, but certainly for the 84es, it will work fine.

Thanks again! :up
linuxman
I have already to re-organize the system. The weatherman predicts 70s and dry for tomorrow through Sunday, and so I thought it would be an excellent time to make a few changes. :)

I have acquired another C2, and will mount it on my SAMI 10 foot dish that I recently became available since I sold the 4DTV unit, so I can add that dish to the system.

I have also come to the conclusion that my 8.5 foot solid Birdview will better serve my needs as a non-moving dish on 103W. I have recently discovered that there are some S2 signals out there that come in on the Birdview Solid, but there is not much wriggle room. With some S2 signals, "bigger is always better". :D

So with that in mind, I am going to turn my 10 foot mesh Unimesh into my motorized dish and have pulled my Mid-Sized AJAK H-H 180 out of storage for that purpose. I will be moving my Bullseye II C/Ku Orthomode from the Birdview Solid and putting it on the Unimesh. The MA/Com Orthomode C-Band will come off the Unimesh and go on the Birdview Solid.

The position on the roof where the Unimesh sets gives me a full LOS from the Horizon on the East, and about 148 on the West. Using the AJAK, I might be able to pick up some of the Atlantic satellites.

I talked to Mike Kohl today and asked him if he thought the Mid-Sized AJAK would be okay for a light dish like the Unimesh. He said he thought it would be fine. He also said the big AJAKs were for 10 foot heavy or 12 foot dishes.

The mid-sized model appears to have a lot more adjustability than the bigger model as well.

I will also be adding a few more Ku LNBFs and dishes as soon as cooler weather again becomes available.

Here are some pics of the AJAK Mid-Sized H-H 180 called the "Aimer":

assembly-ajak-aimer.jpg assembly-ajak-aimer2.jpg assembly-ajak-aimer3.jpg side-chains-ajak-aimer.jpg side-chains-ajak-aimer2.jpg side-chains-ajak-aimer3.jpg side-chains-ajak-aimer4.jpg side-chains-ajak-aimer5.jpg top-chains-limit-switches.jpg top-chains-limit-switches2.jpg wiring-ajak-aimer.jpg wiring-motor-ajak-aimer.jpg
P
I will be interested to see how your dual ortho does on a mesh. Mine seems to like solids much better on Ku.

Does your mid-range Ajak have a continuous adjustment for declination? I couldn't tell from your photos. The heavy-duty Ajak I have only has a coarse adjustment and that is about the only thing I don't like about it. But I can't complain too much because the closest setting is only about 0.01 degrees from what I want.
Bruce
Supporting Founder Lifetime Supporter
Last reply · posted in DIRECTV General Forum
Thanks to Fitch Ratings ( who gives the ratings on Credit and debt, as approved by the SEC, so they have accurate numbers) we have the totals.

DIRECTV's video subscriber base is the third-largest traditional multi-channel video programming distributor (MVPD) in the U.S. with about 8.2 million subscribers at the end of 1Q26.

The last time it was reported, it was 8.8M at the end of 2Q25, so only a 600,000 loss for 3 quarters, which is a major improvement, since for many years before that, it was losing 500,000 a quarter, 2 Million a year.

It is now losing less than Dish/Sling combined, I believe the Genre Packs are helping to retain and get subscribers.

5 Replies · 343 views
raoul5788
They have one less as of May 15th. I just couldn't justify almost $150 a month any more. I went to Fubo. Edit: And I've been a Directv customer for 30 years!
  • Wow
Reactions: harshness
b4pjoe
They have one less as of May 15th. I just couldn't justify almost $150 a month any more. I went to Fubo.
Fubo would be a non starter for me. Missing channels:
  • NBCUniversal Channels: NBC local affiliates, USA Network, Bravo, CNBC, MSNBC, E!, Syfy, Telemundo, and the Golf Channel.
  • NBC Sports: Regional sports networks like NBC Sports Bay Area, Boston, California, and Philadelphia are also off the air.
  • Warner Bros. Discovery Channels: TBS, TNT, TruTV, CNN, Discovery Channel, TLC, HGTV, Food Network, and Animal Planet.
  • A&E Networks: A&E, History, Lifetime, and Vice.
  • AMC Networks: AMC, IFC, SundanceTV, and WE tv
Plus most of its live TV channels and sports broadcasts are currently delivered in 720p.
Jimbo
Fubo would be a non starter for me. Missing channels:
  • NBCUniversal Channels: NBC local affiliates, USA Network, Bravo, CNBC, MSNBC, E!, Syfy, Telemundo, and the Golf Channel.
  • NBC Sports: Regional sports networks like NBC Sports Bay Area, Boston, California, and Philadelphia are also off the air.
  • Warner Bros. Discovery Channels: TBS, TNT, TruTV, CNN, Discovery Channel, TLC, HGTV, Food Network, and Animal Planet.
  • A&E Networks: A&E, History, Lifetime, and Vice.
  • AMC Networks: AMC, IFC, SundanceTV, and WE tv
Plus most of its live TV channels and sports broadcasts are currently delivered in 720p.
YouTube TV
raoul5788
Fubo would be a non starter for me. Missing channels:
  • NBCUniversal Channels: NBC local affiliates, USA Network, Bravo, CNBC, MSNBC, E!, Syfy, Telemundo, and the Golf Channel.
  • NBC Sports: Regional sports networks like NBC Sports Bay Area, Boston, California, and Philadelphia are also off the air.
  • Warner Bros. Discovery Channels: TBS, TNT, TruTV, CNN, Discovery Channel, TLC, HGTV, Food Network, and Animal Planet.
  • A&E Networks: A&E, History, Lifetime, and Vice.
  • AMC Networks: AMC, IFC, SundanceTV, and WE tv
Plus most of its live TV channels and sports broadcasts are currently delivered in 720p.
Understandable. It's always a choice of price vs channels. The $60/month difference made my choice easier.
  • Like
Reactions: dhpeeple1
A
YouTube TV
YTTV don't carry the Regional sports channels
S
Last reply · posted in DIRECTV General Forum
Recently came back to DirectTV Satellite service and have two boxes, Gemini and a main HR54.

DirecTV is charging me two "TV access fees" of $10 each, but can only watch TV on the one without the server. Is there anything I can do to fix this?
24 Replies · 936 views
FHSPSU67
First receiver should be free. It is for me.
b4pjoe
First receiver should be free. It is for me.
It is for me too. Back when they merged DIRECTV via Internet and DIRECTV Stream into one service they raised the TV access fee from $7.00 to $10.00 from both streaming and satellite and they eliminated the first receiver free for new customers only. Existing customers weren't affected by the new price and the elimination of the first receiver free policy.
S
It is for me too. Back when they merged DIRECTV via Internet and DIRECTV Stream into one service they raised the TV access fee from $7.00 to $10.00 from both streaming and satellite and they eliminated the first receiver free for new customers only. Existing customers weren't affected by the new price and the elimination of the first receiver free policy.
All of this makes me want to cancel satellite again! Customer service said we were getting billed for an old receiver but the call got cut off.

Will call back and try to get this resolved. As of now, only one TV can access satellite service. Would hope they can send another Gemini to be co-located w the main HR54.
S
Update: after 20 mins on phone with a non North American call center agent, they are sending a tech out. The tech support couldn't understand that the HR54 was at a different TV than the Gemini.
A
Update: after 20 mins on phone with a non North American call center agent, they are sending a tech out. The tech support couldn't understand that the HR54 was at a different TV than the Gemini.
this is why we canceled support and the csr's are garbage even the american ones. it's still under the att system!!!
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
67110 Replies · 2662364 views
  • Like
Reactions: c-spand
Bobby
I Can't Help It (If I'm Still In Love With You) - B.J. Thomas
  • Like
Reactions: sdfntx
long_time_DNC
Help Is On Its Way - Little River Band
  • Like
Reactions: RaiderPower
sdfntx
Little Band of Gold - Sonny James
RaiderPower
Band Of Gold - Freda Payne
long_time_DNC
Heart Of Gold - Neil Young
zippyfrog
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Phone & Tablet Zone
I feel like this was discussed in another thread, but I can't find it. I have T-Mobile and my last iPhone upgrade was in 2020. I want to get a new iPhone, but what is the best way to go about doing it? Should I order the iPhone from T-Mobile directly, or should I buy from the Apple Store? I feel like there are pros/cons to each option.
2 Replies · 31 views
navychop
I know of no reason to buy from a cell company.

Buying from Apple gets an unlocked phone.

PS- New models come out in Octoberish.
  • Like
Reactions: Foxbat
Foxbat
I got a carrier-locked iPhone once, and it was a pain after they got bought by Sprint and I decided to go to T-Mobile and they dragged their feet to unlock the phone. I have been trading in my iPhones since and buying from the Apple Store since then.
  • Like
Reactions: navychop
C
Last reply · posted in DISH Network Support Forum
I have a Hopper with Sling. (Don't know exact model.) A couple nights ago, I went into the DVR screen, and noted that it was recording three programs. Yet I was able to view live TV (that was not one of the channels being recorded.) Did something change? In the past, it would only let me watch one of the channels being recorded, or any recording in the DVR menu. Maybe it was streaming, although there was no indication of that?

Apologies if this has been covered; I searched and didn't find anything.

Thanks.
9 Replies · 349 views
C
So I tested.

Started recording three non-network shows and tried to watch live TV, would not do it, because all three tuners were in use.

Started recording two non-network shows and one network show. Still would not let me tune live TV.

Started recording one non-network show and two network shows, then it allowed live TV.

I would assume then that previously I was recording two or three network shows when it allowed live TV; I honestly don't remember what it was doing, and I didn't think to check.

Thanks for replies, everyone.

PS - How does one know whether a program is streaming? Is there a way to force streaming?
  • Like
Reactions: charlesrshell
Bobby
So I tested.

Started recording three non-network shows and tried to watch live TV, would not do it, because all three tuners were in use.

Started recording two non-network shows and one network show. Still would not let me tune live TV.

Started recording one non-network show and two network shows, then it allowed live TV.

I would assume then that previously I was recording two or three network shows when it allowed live TV; I honestly don't remember what it was doing, and I didn't think to check.

Thanks for replies, everyone.

PS - How does one know whether a program is streaming? Is there a way to force streaming?
There is no way to force streaming. It is a satellite channel or streaming channel except for the rare occasion that the satellite signal fails. If that happens some, not all, channels will automatically change to streaming. You can tell if the channel is streaming by pressing guide on the remote. if it is a streaming channel the guide will clearly show it that way.
navychop
Cough, cough, Hopper3!
C
There is no way to force streaming. It is a satellite channel or streaming channel except for the rare occasion that the satellite signal fails. If that happens some, not all, channels will automatically change to streaming. You can tell if the channel is streaming by pressing guide on the remote. if it is a streaming channel the guide will clearly show it that way.
Thanks, Bobby.
A
chokes hopper 3 all the way... 16 tuners vs 3 tuners is a night and day difference. along with a faster processor. i would call in and see if they would upgrade me or you can buy a hopper 3 from solid signal.
  • Like
Reactions: charlesrshell
Smuuth
Pub Member / Supporter Cutting Edge
Last reply · posted in SatelliteGuys Classifieds

WANTED  DirecTV LCC

Anyone have a DirecTV Local Channel Connector that you'd like to get rid of at a reasonable price? DirecTV is currently in a contract dispute with owner of my local ABC affiliate.
12 Replies · 297 views
b4pjoe
Anyone have a DirecTV Local Channel Connector that you'd like to get rid of at a reasonable price? DirecTV is currently in a contract dispute with owner of my local ABC affiliate.
You should ask DIRECTV for one if you are affected by the dispute. I know in the past they have given them out during a dispute. Not sure if they still do that but it is free to ask.
  • Like
Reactions: Smuuth
Smuuth
You should ask DIRECTV for one if you are affected by the dispute. I know in the past they have given them out during a dispute. Not sure if they still do that but it is free to ask.
I already asked, but the CS agent said they wouldn't do it. They said the only thing they could do is $10/month bill credit.
Jimbo
I already asked, but the CS agent said they wouldn't do it. They said the only thing they could do is $10/month bill credit.
Take the $10 and Call Back ...
  • Like
Reactions: Smuuth
Smuuth
Take the $10 and Call Back ...
I did that. The response was that the LCC is not available. Escalated the issue to a tech support person with the same results. 🤬
  • Wow
Reactions: Jimbo
Jimbo
I did that. The response was that the LCC is not available. Escalated the issue to a tech support person with the same results. 🤬
Could be out of them I guess ... I'd keep trying, every 3-4 days.

If they are not out of them as them WHY you can't get one, seeing Your in a Dispute. Thats what they are for.
I would make them give you a real answer, don't let them off the hook.


I had one, and it worked well, but I believe I gave it to another D* friend (also had a AM21), I know I gave them away ...
  • Like
Reactions: Smuuth
Smuuth
Could be out of them I guess ... I'd keep trying, every 3-4 days.

If they are not out of them as them WHY you can't get one, seeing Your in a Dispute. Thats what they are for.
According to the tech support guy, they don't have any in stock. He said I should receive an email when and if they have them. I even told him I would accept a refurbished unit. 🙄
Jimbo
According to the tech support guy, they don't have any in stock. He said I should receive an email when and if they have them. I even told him I would accept a refurbished unit. 🙄
I'm not sure your going to find any Refurbished ones as D* doesn't ask for them back.
Smuuth
I'm not sure your going to find any Refurbished ones as D* doesn't ask for them back.
Yeah, I know. At one point, I even had 3 AM21s but gave them away when I got rid of my last HR54 and switched to the HS17.
A
Good luck they haven't made them in years. you could poke around on ebay and see if there's any on there. if not why not a tablo or a zapper box with an antenna connected to it
  • Like
Reactions: navychop
Smuuth
Good luck they haven't made them in years. you could poke around on ebay and see if there's any on there. if not why not a tablo or a zapper box with an antenna connected to it
I have my OTA antenna connected to my television directly already so watching is not the issue. The reason I want the LCC is so I could record programs if I'm not at home to watch them live, especially since ABC is carrying both the NBA and NHL playoffs.
I have an active search on eBay and there is one there but he wants $180 plus shipping and I am not going to pay that.
A
I have my OTA antenna connected to my television directly already so watching is not the issue. The reason I want the LCC is so I could record programs if I'm not at home to watch them live, especially since ABC is carrying both the NBA and NHL playoffs.
I have an active search on eBay and there is one there but he wants $180 plus shipping and I am not going to pay that.
a tablo box is cheaper
  • Like
Reactions: navychop
A
why invest in hardware that's going to be boat anchors in a few years?
zippyfrog
Pub Member / Supporter Lifetime Supporter
Last reply · posted in DISH Network Support Forum
Did anyone have a price increase today on their equipment? I own my VIP211k's, and they have been $5.00. My bill that I received last week shows the "add-ons" as being $5.00. However, I just logged into my Dish account, and my "add-ons" are now $10.00. Did the additional receivers go up by $5.00 recently?

As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.
11 Replies · 196 views
T
Does cable charge box rent?
R
Does cable charge box rent?
The cable company I was with years ago did charge $9.99 for a receiver.

RJ T.
From Illinois
  • Like
Reactions: charlesrshell
R
Did anyone have a price increase today on their equipment? I own my VIP211k's, and they have been $5.00. My bill that I received last week shows the "add-ons" as being $5.00. However, I just logged into my Dish account, and my "add-ons" are now $10.00. Did the additional receivers go up by $5.00 recently?

As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.
I went to try to add the Heartland channel as dummy to see what it would do for me as I own my receiver and have DISH Outdoors and this is what mine shows. (Note however I had to take the 2nd receiver I told you I added the other day off because I was told you can only have 1 receiver when you have a one outlet on the Dish Playmaker and was having issues with the 2nd receiver and I didn't know that and that was done yesterday as well so I am back to one receiver.)

Let's upgrade your package.

Your monthly bill will increase by $6.00 per month.

Breakdown

June 11, 2026 - July 11, 2026
You are changing your programming in the middle of the bill cycle. The bill shown below is your bill for next month including prorations and credits. Your following bill will return to the fixed rate. This bill will take effect from now until July 11, 2026.
Monthly Services
$86.99

Flex Pack
$72.99
Local Channels
$14.00
Add-Ons
$68.98

National Action Pack
$12.00
Regional Action Pack
$12.00
News Pack
$10.00
Paramount+ with Showtime
$10.00
Drama and Classics Pack
$6.00
Heartland Pack
$6.00
Starz Encore Movies
$6.00
On DISH Magazine
$4.99
Starz 2 Mo ($11)
$1.99
Prorated Charges
$7.93

Heartland Pack Jun 11 - Jul 20
$7.93
Order Total
$7.93

Prorated Total
$7.93
Due Today
$7.93

Transition Bill Total
$156.10
Proposed Changes

Your monthly bill will increase by $6.00 per month
Monthly Services
$86.99
Add-Ons
$68.98
FCC Regulatory Surcharge
$0.13
Taxes & Surcharges
$0.00

Monthly Total
$156.10
Prorated Total
$7.93
Order Total
$7.93

Due Today
$7.93

Sounds like an issue with DISH Billing

RJ T.
From Illinois

  • Like
Reactions: charlesrshell
zippyfrog
I asked again, and the rep I talked to said it is a glitch and that "Access for TV" shouldn't be there - the rep pulled up my future month bills and that charge isn't on it. So I am not going to worry about it right now, but it will be interesting to see when the price changes happen later this year. Will this line item show up? The fact that it is a specific item that is different from anything makes me think it is more than a glitch. But we shall see.
R
I asked again, and the rep I talked to said it is a glitch and that "Access for TV" shouldn't be there - the rep pulled up my future month bills and that charge isn't on it. So I am not going to worry about it right now, but it will be interesting to see when the price changes happen later this year. Will this line item show up? The fact that it is a specific item that is different from anything makes me think it is more than a glitch. But we shall see.
I am hoping they don't add this down the road. Things are expensive the way it is now. Even DIRECTV allows the first receiver free. This would go against DISH and DISH is already loosing subscribers I wouldn't think they would do these kind of tricks but you never know. Always look at your bills for unknow charges. I heard horror stories of people getting charged for things they didn't know were there.

RJ T.
From Illinois
  • Like
Reactions: charlesrshell
A
Does cable charge box rent?
yes big cable charges crazy dvr fee's and box rental fee's
  • Like
Reactions: charlesrshell
T
Last reply · posted in DISH Network Support Forum
Hello everyone, new guy here. I'm trying to solve problem I'm having with Dish bonus view channels. When I'm watching the bonus view channels then I switch back to regular dish channels, after few minutes the screen flips to black and after 30 seconds flips back to regular channels and continues to flip back and forth until I turn off TV. After I wait 30 minutes and turn back on , I can use regular channels again. So, its after I switch from bonus view channels to regular dish channels the problem starts. Been trying to fix this for a month, but no luck
Here what I've done.
i contacted Dish support and they sent me a new Joey3, but no help. Switched to a different HDMI input on TV, no help. Used different HDMI cable , no help. Used different electrical wall plug, no help.
Finally got a Dish tech to check it. He ran all systems check and was OK. Finally he brought in a small TV and plugged in the HDMI out from the Joey to the small TV. He could not get the problem to occur on his small TV, so the new Joey was working OK. So, then the problem must be myTV. He made some phone calls and came back with the answer that there must be a problem with the analog to digital switch in my TV. Has anyone ever heard of a problem like this, or is it time to be looking for a new TV? My tv LG OLED65C8PUA. TV has been trouble free til now. Thanks
6 Replies · 99 views
HipKat
Hello everyone, new guy here. I'm trying to solve problem I'm having with Dish bonus view channels. When I'm watching the bonus view channels then I switch back to regular dish channels, after few minutes the screen flips to black and after 30 seconds flips back to regular channels and continues to flip back and forth until I turn off TV. After I wait 30 minutes and turn back on , I can use regular channels again. So, its after I switch from bonus view channels to regular dish channels the problem starts. Been trying to fix this for a month, but no luck
Here what I've done.
i contacted Dish support and they sent me a new Joey3, but no help. Switched to a different HDMI input on TV, no help. Used different HDMI cable , no help. Used different electrical wall plug, no help.
Finally got a Dish tech to check it. He ran all systems check and was OK. Finally he brought in a small TV and plugged in the HDMI out from the Joey to the small TV. He could not get the problem to occur on his small TV, so the new Joey was working OK. So, then the problem must be myTV. He made some phone calls and came back with the answer that there must be a problem with the analog to digital switch in my TV. Has anyone ever heard of a problem like this, or is it time to be looking for a new TV? My tv LG OLED65C8PUA. TV has been trouble free til now. Thanks
First off, great TV. I'm torn between the 77C5 or the 77G5.
It sounds like the handshake between the Receiver and the TV is having a problem. Are you using the free cable that came with the Joey or a higher speed HDMI cable?? That's the f irst place I'd look
R
Hello everyone, new guy here. I'm trying to solve problem I'm having with Dish bonus view channels. When I'm watching the bonus view channels then I switch back to regular dish channels, after few minutes the screen flips to black and after 30 seconds flips back to regular channels and continues to flip back and forth until I turn off TV. After I wait 30 minutes and turn back on , I can use regular channels again. So, its after I switch from bonus view channels to regular dish channels the problem starts. Been trying to fix this for a month, but no luck
Here what I've done.
i contacted Dish support and they sent me a new Joey3, but no help. Switched to a different HDMI input on TV, no help. Used different HDMI cable , no help. Used different electrical wall plug, no help.
Finally got a Dish tech to check it. He ran all systems check and was OK. Finally he brought in a small TV and plugged in the HDMI out from the Joey to the small TV. He could not get the problem to occur on his small TV, so the new Joey was working OK. So, then the problem must be myTV. He made some phone calls and came back with the answer that there must be a problem with the analog to digital switch in my TV. Has anyone ever heard of a problem like this, or is it time to be looking for a new TV? My tv LG OLED65C8PUA. TV has been trouble free til now. Thanks
First off, The analog to digital switch, also known as the digital television transition, is the process of converting older analog television broadcasting technology to digital broadcasting. It's used through coaxial cable for the an antenna during the mandatory switch from Analog to Digital on June 12, 2009. You either had to get a converter for your analog (Tube TV) or use a converter box that has the analog or digital tuner or an HDTV which your is and has the tuner built in. Your TV is HD and using an HDMI Cable and nothing is connected by coaxial cable so this wouldn't apply.

In my theory it probably means a new TV. I had a TV go out on my switching between the Smart Screen from the HDMI inputs before because they went faulty. Sometimes electrical surges can cause this. If you have an older home or rent an older home or apartment sometimes the electrical outlets are not grounded and these days HDTV's need a ground which can cause them to malfunction and go bad quicker. Never plug it directly in an outlet. It will damage the TV.

Hope I could be of some assistance.

RJ T.
From Illinois
  • Like
Reactions: charlesrshell
T
First off, The analog to digital switch, also known as the digital television transition, is the process of converting older analog television broadcasting technology to digital broadcasting. It's used through coaxial cable for the an antenna during the mandatory switch from Analog to Digital on June 12, 2009. You either had to get a converter for your analog (Tube TV) or use a converter box that has the analog or digital tuner or an HDTV which your is and has the tuner built in. Your TV is HD and using an HDMI Cable and nothing is connected by coaxial cable so this wouldn't apply.

In my theory it probably means a new TV. I had a TV go out on my switching between the Smart Screen from the HDMI inputs before because they went faulty. Sometimes electrical surges can cause this. If you have an older home or rent an older home or apartment sometimes the electrical outlets are not grounded and these days HDTV's need a ground which can cause them to malfunction and go bad quicker. Never plug it directly in an outlet. It will damage the TV.

Hope I could be of some assistance.

RJ T.
From Illinois
Thank you for the information. I do keep the TV plugged into a surge protector, but we have had pretty strong thunderstorms/lightning in the last month so that have contributed to my problem.The house was built in 2009 so everything seems to be grounded correctly. We have had a power surge also. Seems like no one fixes anything any more, so just get a new one or live with the problem. Thanks
  • Like
Reactions: charlesrshell
T
First off, great TV. I'm torn between the 77C5 or the 77G5.
It sounds like the handshake between the Receiver and the TV is having a problem. Are you using the free cable that came with the Joey or a higher speed HDMI cable?? That's the f irst place I'd look
I think the HDMI cable is good, i used one of my own from my 4K atmos system, i'll switch it with another just to check. Also I have a bid in at Greentoe for 77" G5. Thanks
HipKat
I think the HDMI cable is good, i used one of my own from my 4K atmos system, i'll switch it with another just to check. Also I have a bid in at Greentoe for 77" G5. Thanks
I hope that works. I'm waiting til Black Friday sales
  • Like
Reactions: charlesrshell
Darrell S
I've had this problem with my older Sony TV. It happens when I just punch in a regular channel number. The only way it works right for me is to push guide and select a regular channel from the guide screen.
  • Like
Reactions: charlesrshell
teachsac
Staff member HERE TO HELP YOU!
Last reply · posted in TV Shows
House of the Dragon, the prequel to Game of Thrones, premieres on HBO Max on 8/21. I will be warching



View: https://youtu.be/fNwwt25mheo


S~
39 Replies · 5645 views
KAB
KAB
That was as bad as the rest of the show. Jean Smart was mostly invisible.
Jim S.
I prefer the trailer for the movie adaptation of Mario Kart. At least that had Pedro Pascal in it.
harshness
"A new line of unsullied kings" would seem impossible given the GoT definition of "unsullied". :biggrin
  • Like
Reactions: Foxbat
osu1991
  • Like
Reactions: Foxbat